Which Roof Coating Is Best for a Flat Roof?


Flat roofs can't be really flat. Any roof must have some slope, or pitch, to allow water to run off. Any roof that has a slope of less than 3 inches per foot is considered flat. Even with some pitch, though, flat roofs pose a challenge and need different coverings than pitched roofs. The basic coating options for a flat roof are built-up, membrane or liquid.


  • A built-up roof is composed of layers of some kind of waterproof membrane, once tar paper but now more likely a plastic material, alternated with hot tar or roofing compound and gravel. It is the cheapest type of flat roof, but the most difficult and messiest to install and difficult for a homeowner to put on himself. A built-up roof is also heavy and often requires extra bracing on the roof framing. In addition, it can be hard to find leaks in a built-up roof.


  • Membranes embrace several types of material, usually some type of plastic or rubber compound, installed in rolls or sheets. Styles include thermo-plastic olefin (TPO), applied in large rolls with seams fused with heat; single-ply polyvinyl chloride (PVC), similar to TPO in appearance and installation; ethylene propylene diene terpolymer (EPDM), a rubber material applied with special contact cement; and modified bitumen, a material similar to the components of built-up roofs but installed from rolls in layers.


  • Liquid coatings are typically used in reroof situations, with a liquid roofing coating applied over some existing flat roof material. A liquid coating system involves cleaning and patching all seams and any obvious tears or damage to the existing material. A bonding resin is embedded in a polyester fabric that is rolled over the entire roof. A black tar-like liquid compound also is used to resurface or repair some membrane roofs.


  • Warranties on flat roof coverings vary widely. Some liquid coating roofs are warranted for only five to 15 years, and they may be subject to building codes governing the number of layers of roofing that can be applied. Built-up roofs usually have warranties of 10 to 20 years but can last longer. EPDM is the easiest material for a homeowner to install, although its contact cement requires careful handling, and it is the longest-lasting, with some types carrying 30-year warranties. It also is the easiest to patch.

Related Searches


Promoted By Zergnet


You May Also Like

  • How to Repair a Flat Roof

    Water runs right off of sloped roofs, but flat ones must maintain a watertight seal to prevent leaking. When you have a...

  • How to Seal a Flat Roof

    Flat roofs aren't really flat but have minimum slope to allow sufficient drainage. Ponding, or pooling of water, on flat roofs is...

  • How to Apply Elastomeric Roof Coating

    Elastomeric roof coating is a product designed to heal slight damage to roofing materials as well as protect the surface. "By fixing...

  • How to Install Roofing on a Flat Roof

    Installing roofing on a flat roof is a job a homeowner can accomplish on their own. With the proper tools and an...

  • How to Coat a Rubber Membrane Roof

    Over time the rubber membrane on a roof deteriorates, causing leaks that need repair. Extreme weather conditions can tear rubber. The resultant...

  • Do-it-Yourself Flat Roof Coating

    Flat roofs require different coverings than pitched or sloped roofs, since they are more likely to hold water in pools, which can...

  • What Is Flat Roof Silver Coating?

    The terms "silver coating" and "silver paint" describe a family of roof coatings designed to protect rooftops from the elements, especially in...

  • How Often Should a Flat Roof Be Coated?

    Periodically coating a flat roof may double the roof's lifespan. While most flat roofs last at least 10 years, coating it every...

  • What Is Elastomeric Roofing?

    One of the easiest ways to protect your investment in a building is to maintain its roof. Water damage from a leaky...

  • The Best Flat Roofing Materials

    A flat roof, in contrast to the sloped form of a pitched roof, is horizontal or nearly horizontal. Both the design of...

  • The Best Roof Coatings

    To determine what makes a roof coating material good, consider three qualities. First, how long the material will last before it has...

  • Flat Roof Material Types

    While many residential structures have a sloping roof, many commercial and multi-family structures utilize a flat roofing system. Just as sloping roofs...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!