How to Paint Enamel on Metal

Hunker may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

Enamel is one of the most durable paints available. Metal is one of the most durable materials available. Therefore, painting metal with enamel will result in a very durable object, regardless of what the object is. As long as you pay attention to the preparation of your metal before painting, you will end up with professional-looking results for very little money and time spent.

Advertisement

Step 1

Sand or wire brush the metal object to remove any peeling paint, loose previous coating or rust spots.

Advertisement

Video of the Day

Step 2

Spray water from the sink or garden hose onto the metal object to thoroughly remove any sanding dust. Allow the metal object to dry.

Advertisement

Step 3

Lay newspapers or a drop cloth carefully on an outdoor or garage work surface, as over spray from spray paint cannot be easily removed.

Advertisement

Step 4

Apply the solvent or acid to the entire metal surface with the rag. Use a toothbrush to reach into crevices. The solvent will remove any oils or difficult debris to further prepare the surface of the metal. Allow the solvent to dry.

Advertisement

Step 5

Spray a thin coat of primer onto the object. Be sure to use wide, sweeping strokes to prevent the primer from pooling and dripping. Spray paint comes out fast, so you may wish to practice your spray technique on a piece of cardboard first. Be sure to thoroughly coat the entire metal object with primer.

Advertisement

Advertisement

Step 6

Allow the primer to dry for several hours or overnight.

Advertisement

Step 7

Spray a thin coat of enamel onto the metal object, using the same technique you used with the primer.

Advertisement

Step 8

Allow the enamel to dry overnight, and then add another coat of enamel. Allow to dry overnight again before using the metal object.

Video of the Day

Advertisement

Advertisement

Report an Issue

screenshot of the current page

Screenshot loading...