The spin cycle of a washing machine rotates the drum, extracting water from the load. This process reduces drying times. If your clothes are extremely soggy, the washing machine spin cycle may not be working properly. Troubleshoot this issue before contacting the manufacturer or washing machine repair person. You can often fix this problem on your own, saving yourself money on fees.
Your washer won't enter the spin cycle if the lid is open. Move any objects keeping the lid from closing, and shut the lid. The lid switch lets the washer control board know that the washer lid is closed. The water level switch determines how much water is in tub and whether that is enough water to start the cycle. If either of these switches is defective, your washing machine won't start spinning. Disconnect the washing machine from the outlet, and remove the main access panel. Test both switches with a multimeter, and determine if they have continuity. If not, get new switches from a washing machine parts dealer since it's difficult to repair these parts.
The timer advances the washing machine through the wash cycles. If the timer is not working properly, your washer may not enter the spin cycle. Unplug the washing machine, and test the timer with a multimeter. If it doesn't have continuity, you must get a new one since it's hard to fix the timer. Certain types of washing machines have motor couplers, which will be located between the transmission and motor shaft. These couplers easily break after repeated use since they are made of plastic and rubber. Replace the coupler.
Your washing machine won't spin if the transmission is leaking or has broken gears. Remove the main access panel, and examine the transmission. If the transmission is defective, you can rebuild it if you have the proper knowledge. If not, you must replace the transmission. If the transmission is leaking, check the clutch. If the clutch is oily or is worn out, get a new one since you usually can't fix this part.
The agitator connects to the transmission shaft. The connection can wear out, preventing the agitator from rotating correctly. If the agitator itself looks fine, you may only need to replace the transmission spline. If not, replace both components. Your washing machine has either one or two belts, which can break or slip off. Reattach the belt to the pulley if it's fallen off, or replace the belt if broken or extremely worn.
- Photo Credit Jupiterimages/Brand X Pictures/Getty Images
How to Repair a Washing Machine That Will Not Spin
Washing machine problems are very frustrating, as they make washing clothes fast and simple. One of the most common problems with washing...
My Maytag Clothes Washer Does Not Spin Clothes Dry
Maytag clothes washers vary in size and finish and are available with a wide spectrum of options, from standard temperature and spin...
The Agitator in My Whirlpool Washer Won't Spin
Whirlpool top-load washers use a plastic agitator with several paddles attached along its shaft in the centre of the drum to mix...
Why a Whirlpool Washing Machine Is Not Spinning
The final cycle of any washing machine, including Whirlpool units, is the spin cycle. During this cycle, water is sucked out of...