Washing Machine Will Not Wash

Save

A washing machine has an agitator that moves your clothes up and down. The tub fills with water, which dissolves the detergent. These processes combine to clean your clothes. If your washer won't start, troubleshoot the issue, and see if you can determine which component is causing the issue. Fixing the problem yourself eliminates expensive technician fees.

Power

  • If your washing machine won't start washing your clothes, see if you are experiencing a power outage. Wait for the power to come back on. Check your home fuses, and replace any blown fuses. If you have circuit breakers, reset a tripped one. Push the washing machine power cord firmly into the outlet. Test the outlet with another appliance, and see if it's live. Examine the power cord, and repair or replace it if any wires are exposed.

Water Level/Lid Switch

  • The water level switch senses the amount of water in the washing machine. If this switch is defective, your washing machine won't think it has enough water to start the washing cycle. The lid switch lets the washing machine know that the lid is closed. Your washer won't start washing with the lid open. Test both of these switches with a multimeter. Disconnect the washing machine from the power source, and remove the main access panel. See if the switches have continuity. If they don't, you will need to replace the defective switch. It's hard to repair switches.

Water Supply

  • If your washer isn't filling up with water, it won't start washing your clothes. Verify that both inlet valves are turned on. See if the water supply valve is working properly. If it's leaking or won't turn, you must replace this component, since it's difficult to repair. Straighten the inlet hoses if they are bent, and clean the inlet screens. Inspect the inlet hose, and see if it's clogged with debris. Scoop out the debris with a plastic utensil. Test your home water pressure, using a water pressure gauge. If the pressure is below 30 psi, turn off water in the other parts of your home. Wait for the pressure to return to normal before trying to wash your clothes.

Motor/Timer

  • Your motor can burn out or get stuck, preventing your washing machine from starting. Disconnect the washing machine from the main power source, and try turning the motor. If it doesn't turn after a few minutes, use a multimeter, and see if it has continuity. If it doesn't, you need a new motor. The timer controls the wash cycles. If the timer is defective, your washer won't start. See if the timer has continuity, and replace it if necessary.

Related Searches

References

  • Photo Credit Martin Poole/Lifesize/Getty Images
Promoted By Zergnet

Comments

Resources

You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!