Cast iron and cast steel are both mostly made from iron, and therefore can be nearly indistinguishable in appearance. However, they are distinguishable by their physical properties, such as cast iron being more vulnerable to corrosion.
The cast iron process starts with iron ore or recycled iron being melted in a furnace ranging from 2,600 to 2,800 degrees Fahrenheit. After it is melted, the iron is poured into specifically designed molds. The cast steel process involves the removal of carbon from smelted iron. The carbon is replaced by elements like silicon and manganese, which leads to an alloy with a carbon content below 1 percent.The result is a high-tensile and compressive-strength alloy.
When cast iron is first made, it typically has a protective film or scale covering and protecting it from corrosion. It also often contains imperfections, such as impurities, air holes or small cracks. These imperfections can lead to structural failure; therefore, cast iron is considered relatively brittle. Cast steel can be made with a range of processes and compositions, each with different hardness, strength, ductility and fatigue resistance properties. For example, hardness of a steel is mostly determined by carbon content and heat treatment.
Because cast iron is cheap, durable and can be easily molded into countless shapes, it is used for stairs, fences, tools, utensils, stoves, piping and much more. Cast steel can be used to make many of the same products, but it is often chosen when one needs a stronger or more durable option -- as its formulation can be adjusted accordingly. Additionally, steel can be forged into an even stronger material. Forged steel has been used to make swords.
When cast iron is properly protected from expose and deterioration, it can be a highly useful and robust material. However, exposure to moisture and air will cause it to rust. In the presence of acid rain or sea water, cast iron can go through a process called graphitization, in which iron is removed form the cast iron, but the carbon stays in place. This results in a weaker piece. In comparison to cast iron, steel has poorer wear resistance and mobility. It is also more expensive to make.
- Photo Credit MSPhotographic/iStock/Getty Images
Differences Between Steel Pipe & Black Iron Pipe
The average homeowner is unaware of how much piping leads into and out of their home. There are the ever-present pipes underneath...
Difference Between Galvanized & Stainless Steel
Though both materials are steel, galvanized steel and stainless steel are very different materials that have a variety of applications. Knowing the...
Difference Between Steel & Wrought Iron
Wrought iron and steel may seem similar on the surface, but these two metal alloys possess different raw materials, properties, and industrial...
Iron Versus Steel Properties
Steel is an a product of iron, which itself has two separate types: cast iron and wrought iron. All three of these...
How to Tell if Your Tub Is Cast Iron
Bathtubs come in a number of different materials. From lightweight fiberglass tubs to heavy cast iron to stainless steel, tubs are made...
How to Tell a Fake Cast Iron Pan
If you take good care of a cast iron pan, your great grandchildren will be able to pass it on to their...
How to Identify an Old Cast-Iron or Steel Tub
Bath tubs come in a variety of materials, from fiberglass/acrylic to cast iron to steel. Older tubs are made of cast iron...
How to Tell Ductile Pipe From Cast Iron Pipe
Ductile iron pipe is lighter, stronger, and more durable than cast iron. The difference between cast iron and ductile iron is the...
The Difference Between Cast Iron & Forged Steel Fitting
Both cast iron and forged steel fittings are essential parts of commercial buildings and houses. They connect pipes in buildings, including lavatory...
Differences Between Fiberglass and Porcelain Tubs
There are several key differences between fiberglass and porcelain tubs, and understanding these differences can help inform your choice between the two....