What Are Three Important Parts Needed to Make a Battery?

Save

A battery is a voltaic cell, also known as a galvanic cell (or a group of connected cells). It is a type of electrochemical cell used to provide electricity created by a chemical reaction. A simple battery can be constructed by placing electrodes of different metals in an electrolyte fluid. The chemical reaction that occurs produces an electric current. Thus, the three main parts of a battery are the two electrodes and the electrolyte.

Voltaic Cells

  • Some metals lose electrons more readily than other metals. This can be exploited to produce a flow of electrons from one piece of metal to another, by submerging two pieces of different metals in a conductive solution, such as a solution of metal salts. This is called a voltaic cell. Zinc and copper can be used to make a voltaic cell because zinc gives up electrons more readily than copper. The metal plates are called the electrodes: the anode and the cathode.

The Cathode

  • A cathode is one of the two electrodes in a polarized device such as a voltaic cell. Current flows out of the cathode. A useful mnemonic for remembering this is CCD: Cathode Current Departs. (Note that this refers to the direction of the conventional current, not the electron flow, which is in the opposite direction.) In a discharging battery the cathode is the positive electrode. In the case of a battery using copper and zinc electrodes, the cathode is the copper electrode.

The Anode

  • In a polarized electrical device, the anode is the terminal where current flows in. A mnemonic used to remember this is the word ACID: Anode Current Into Device. (Again, this refers to conventional current, not the electron flow.) In a device which provides power, such as a discharging voltaic cell, the anode is the negatively charged terminal. In a cell made with zinc and copper plates, the anode is the zinc plate.

The Electrolyte

  • In a voltaic cell, the electrolyte is a conductive fluid. A good current can be obtained by submerging a copper electrode in a solution of copper sulfate and a zinc electrode in a solution of zinc sulfate, with a conductive bridge between the two containers of electrolyte. When building a battery, however, any conductive fluid can be used. A glass of salty water is one possibility; other sources of electrolyte include fruit juices.

Making a Battery

  • A battery can be made using a piece of fruit or a vegetable such as a lemon or a potato to provide the electrolyte. The juice inside is conductive so when two pieces of metal, such as a copper penny and a zinc nail, are pushed into the fruit, an electric current is produced. This can be used to power a small electronic device with a low power requirement, such as a digital display.

References

  • Photo Credit Jupiterimages/Photos.com/Getty Images
Promoted By Zergnet

Comments

Resources

You May Also Like

  • Parts of a Battery

    The composition of a battery differs depending on the type--alkaline, lithium or zinc chloride. Batteries come in all shapes and sizes and...

  • How to Replace a Mini Cooper Battery

    The battery in your Mini Cooper is put to use every time you start your car. Without the battery, you would not...

  • How to Make a Voltaic Cell

    Whether a battery is composed of wet cells, like those found in automobiles, or dry cells, like those in flashlights, the principal...

  • The Three Things Needed to Make Electricity

    Electricity has been powering our modern society for many years and will well into the future. Making electricity may seem difficult or...

Related Searches

Check It Out

How to Build and Grow a Salad Garden On Your Balcony

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!