Contents of PVC Cement

Save

PVC conduit and piping has become a staple in the building industry. Products ranging from interior water lines, electrical conduit, outdoor storage cabinets and PVC tarps are used in and around virtually every home. Installation of PVC piping and conduit requires PVC cement. This cement is composed of highly caustic chemicals and must be handled with care.

Methyl-Ethyl-Ketone

  • Methyl-Ethyl-Ketone, otherwise known as MEK, is a highly poisonous, and environmentally toxic liquid. One of the most toxic elements in PVC cement, MEK should not be allowed to touch a person's skin, eyes or be inhaled for a prolonged period. MEK is available commercially, usually sold with paint solvents and commercial paint strippers. This product does not break down quickly in the environment and remains toxic for prolonged periods of time.

Acetone

  • Another dangerous chemical, acetone is a swiftly evaporating solvent which is used as a carrier in many commercial chemicals. Acetone is included in model glues, some paints and solvents which remove adhesive residue from masking tape or duct tape. Acetone is also highly flammable. For this reason, PVC cement should be used in areas which are well ventilated, and where any open flames or pilot lights have been extinguished.

PVC Resins

  • PVC cements work so well because they melt the hard plastic surface of the PVC pipe and and thus cold-weld the two surfaces together. The carriers and solvents melt the surface of the PVC plastic pipe and fittings. The PVC resins in the glue mix with the melted surfaces to form a complete, water-tight bond as the surfaces meld. After the solvent is allowed to cure, the joint acts as if it had been manufactured as one part.

Other Chemical Carriers

  • Tetrahydrofuran (THF) and Cyclohexanone are two more carriers that keep the PVC resins in suspension. These chemicals do not evaporate as quickly as MEK and Acetone. They provide the adhesive with the ability to melt the surfaces of the pipe and fittings and slowly reform into a single bonded surface. THF is a liquid polymer which acts in conjunction with PVC resins. Cyclohexanone is in the same chemical family as MEK, and works in conjunction with this component to dissolve the PVC surface and form the new bonds.

References

  • Photo Credit Jupiterimages/Photos.com/Getty Images
Promoted By Zergnet

Comments

Resources

You May Also Like

  • How to Build a Hydrogen Electrolyzer

    Cement one of the 90-degree elbows to the open end of one of the 1-foot PVC pieces cemented to the T. Turn...

  • How to Cement PVC Pipe

    When cementing PVC pipe, make sure to work in a well-ventilated area and cover the floor in order to avoid damage. Cement...

  • How to Use PVC Cement

    Solvent-bonding PVC pipes and fittings requires the use of PVC cement. The PVC cement needs a clean surface that is free of...

  • How Do I Loosen PVC Cement?

    PVC cement is used to connect PVC piping with PVC couplings, also known as joints. The cement creates a strong bond by...

Related Searches

Read Article

5 Small Entryway Decorating Ideas

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!