Whether you are a renter, homeowners or business manager, you know that smoke detectors save lives. Keeping these units maintained is the only way to ensure that your family, home and business are safe in a fire emergency. If your smoke detector is beeping erratically with no need for alarm, it’s letting you know some maintenance is required.
The common reason for a smoke detector to beep when there is no cause for alarm is that something is wrong with the batteries. Most smoke detector batteries must be changed at least once per year; many people change them twice per year, when they spring forward or fall back for daylight savings time. The irregular beeping indicates that the batteries do not have enough power to support the alarm. If you just changed the batteries to fresh ones, make sure they are installed correctly and are fully in contact with the sensors inside; improper placement can lead to weakened power flow.
If the batteries are good and the machine still beeps, check the installation date, which is commonly printed on the machine or in your user’s manual. Smoke detectors are generally meant to last for 10 to 15 years, and the beeping on the detector may be to let you know that the time for replacement has come. If your smoke detector is hard wired into your electrical system, or if you have questions about what type of detector to use as a replacement or how to install it, talk to a professional contractor or electrician for help.
Most smoke detectors feature a silence button, which allows you to stop the alarm if it goes off as a result of cooking, showering or another non-emergency situation. If you press this button, clear the air and then reset the detector so that it knows that there is not an emergency. If you don’t follow that procedure, the detector will beep every minute or so remind you that it is still on silence mode and needs to be reset.
Smoke detectors that are in serious need of cleaning will also beep erratically, especially if the dirt or dust layers are situated over the sensor of the machine. If the sensor is blocked it will not be able to detect an emergency, so it will let you know that it needs to be cleaned. Remove the alarm from its place and use a vacuum attachment or dust cloth to remove all dirt and dust, especially in the gap between the front cover and back of unit, which is where the sensor sits.