The Type of Gravel to Use for Pavers

Save

Construction gravel is usually crushed limestone. Big boulders are blasted out of a quarry, then run through giant crushers to grind them into smaller pieces. Chunks are put through screens or other filters to divide them into fairly uniform sizes. The most common gravels used under pavers are fine, about 3/8 inch; medium, 1/2 to 3/4 inch, and coarse or heavy, up to 1-1/2 inches. Bigger gravels and other gravel stones are available but usually are not used for paver bases.

Fine Gravel

  • Use fine gravel where a really solid base is required and subsurface drainage is not a concern. Fine gravel compacts almost like sand into a really tight surface. That may not provide enough drainage or seepage to allow water to permeate into the ground below, especially if it is tight or heavy dirt like clay. That can lead to pockets of water under the pavers, which freeze and cause the paving to heave or buckle.

Medium Gravel

  • Medium gravel is the choice for most paver bases. It compacts tightly, but with small gaps between stones so water can percolate into the dirt below. It forms a base solid enough to hold a sand bed for the pavers and strong enough for most weights put on pavers, even standard cars in a driveway or big smokers on a patio.

Coarse Gravel

  • Use coarse gravel where the pavers and base will be subject to heavy weights, such as a driveway where multiple vehicles, bigger trucks and heavy boats will be driven and parked. Coarse gravel will not compact as tightly, but the larger stones provide more support under heavy loads. Coarse gravel is sometimes used as a base course or layer and topped with medium gravel before a sand bed is added. Coarse gravel allows good subsurface drainage.

Recycled Gravel

  • Consider repurposed gravel, old concrete that has been crushed just like limestone (limestone aggregate is a component of most concrete). Recycled concrete gravel can work as well as limestone in most applications. It is usually cheaper and always will conserve natural limestone resources. Lay it and compact it just like limestone gravel.

References

Promoted By Zergnet

Comments

Resources

You May Also Like

  • Concrete: Ratio of Sand & Gravel

    Concrete is generally mixed with cement, coarse aggregate (gravel), fine aggregate (sand) and water. Sand and aggregate help reduce the cost of...

  • How to Lay Paving Stones in Gravel

    Laying pavers in gravel creates a pleasing effect and is ideal for areas with a lot of rain or wind. Use gravel...

  • How to Do Patio Pavers

    Paver stones can be used to create a beautiful, resilient patio, if you take your time in planning and are willing to...

  • Types of Small Crushed Gravel

    Building materials suppliers offer a wide variety of crushed rock for both construction projects and decorative applications. Common construction applications of gravel...

  • What Type of Gravel Should Be Used for Patio Stones?

    Stone patios offer a long-lasting, naturally weather-resistant surface for outdoor living. Whether you prefer uniformly cut paving tiles, pavers or snapped pieces,...

  • Gravel Size for a Driveway

    Gravel is an inexpensive, widely used landscaping material that comes in a range of sizes for various purposes. If you're paving a...

  • Do I Need to Lay Gravel Before Pavers?

    Pavers are a versatile, strong paving material used to build walkways, driveways and other outdoor surfaces. You have several ways to install...

  • Types of Sand for Pavers

    Sand is important for the proper installation of pavers. It forms a base which the pavers are set into and prevents the...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!