Wood Carving Finishing Techniques

Save

One of the worst things that can happen to a carver is to spend hours on a carving, only to ruin it when applying a finish. There are many methods of finishing a carving that work well, but eventually you may want to experiment to find what works best for you. Always try techniques on a scrap piece of wood, preferably a piece that’s the same wood as your carving.

Over Paint

  • Once the acrylic or oil paint on your carving is dry, spray the entire carving with at least three light coats of lacquer, such as a semi-gloss or satin clear wood finish. Make sure to spray the top of your carving as well as under protruding parts such as brims of hats. Once dry after the final coat, use a crumpled piece of a paper bag to go over the carving to remove any rough areas left by the lacquer.

    You can leave the carving as is, or for an antiqued look and to soften the look of acrylic paint, apply colored wax over the lacquer. Be sure to have full coverage of lacquer on the carving, or it will end up too dark. Mix 50 percent natural and 50 percent dark wax in a container. Brush on the wax, making sure to cover all areas of the carving, except for the rough, outer part of cottonwood bark. Wipe the wax off using a soft cloth; use a brush to pull it out of areas that look too dark or where the wax has pooled. Leave the wax in areas you want highlighted, such as hair or creases in clothing. Let it dry for at least two hours and buff it to a soft sheen with a shoe brush.

Oil

  • Danish oil is a durable, good looking finish that is easy to apply. It can make basswood take on a golden color, however. Apply the oil with a soft bristled brush and let it sit for 15 minutes. Use a soft cloth to wipe off the excess oil. Repeat the process the next day.

Shoe Creme

  • Shoe creme works as an effective finish for wood and cottonwood bark carvings. It’s not known however, how long this type of preservative will last. In his book “Carving Tree Bark”, author Rick Jensen states he knows of a carving finished with shoe creme that is 25 years old and still looks fine. Apply clear shoe creme to your carving to allow the wood grain to show through, or use colored creme instead of paint. Work the creme into all parts of the carving with a bristle brush. Once dry, buff the carving with a horsehair shoe or rotary brush, apply a second coat and buff it again for a final finish.

Wax

  • Wax, or even floor wax, can be applied alone to a carving when you want the color of the wood to show through. Brush it on, working it into crevices, and then use a horsehair brush to buff it once it’s dry. It may take several coats to achieve a nice sheen.

References

  • “Illustrated Guide To Carving Tree Bark”; Rick Jensen; 2004
  • Photo Credit Jupiterimages/Polka Dot/Getty Images
Promoted By Zergnet

Comments

You May Also Like

  • How to Build a Wood Sculpture

    Artists use many mediums to create their work. Wood may be one of the earliest materials used for sculpting.

  • How to Paint a Wood Carving

    Since the beginning of time people have carved tools, instruments, utensils and other items out of wood. Decorating your wood carving with...

  • How to Carve Cottonwood Bark

    Cottonwood trees grow across the North American continent from Canada down to the southern Texas plains. The unique bark structure of cottonwoods...

  • How to Make Furniture Look Old With Crackled Paint

    You don't need to inherit antiques to fill your home with the charms of worn and aged furniture. Paint it old in...

  • Finishing Touches for Wood Carving

    Learn finishing touches for your woodcarving project in this free woodworking tips video from our expert wood carver.

  • Sanding Wood Sculptures

    Sanding a wood sculpture smooths the surface for painting. Sand wooden sculptures with tips from an artist in this free sculpting video.

Related Searches

Check It Out

DIY Wood Transfer Christmas Ornaments

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!