Soldering metal together to make jewelry is a basic necessity in jewelry making. Since it's like welding, it may seem daunting at first, but soldering jewelry is done on a much smaller scale. Torches are not just for soldering, they're used to anneal the metal, which is heating it to ensure it's malleable enough to be worked with. Different torches use different types of fuel, such as butane or propane, and each burns at a specific temperature.
That hand-held butane torch that you use to melt the sugar on top of your creme brulee is pretty much the same as butane torches that can be used for making jewelry. Butane torches are often small, hand-held torches that are portable and have a small flame that ignites with the push of a button. These torches do not get very hot and are useful when soldering very fine pieces of jewelry, such as small chains or rings.
Propane torches are hotter than butane torches and use propane as a source of fuel. A plumber's propane torch can be used for making jewelry, however, there are jewelry-specific torches that are easier to use. These torches have interchangeable tips and a regulator that allows you to adjust how much air you want to let into the torch, which mixes with the propane so that it burns hotter or cooler. This torch, often called "The Whale," connects to a hose fitted with an attachment that connects to small propane cylinders that are often used for camping. Propane is a clean-burning fuel that doesn't cause metal to oxidize as readily as acetylene, for example.
An acetylene torch uses a single "B tank" of acetylene that's made from natural gas. It gets hotter than propane, so it's a good alternative when soldering larger pieces of jewelry. The downside: Acetylene is a "dirtier" gas, so it oxidizes metal more quickly. The B tank acetylene uses ambient oxygen -- oxygen in the air -- that mixes with the gas to control the heat. There's just one dial; the more you open the gas, the larger and hotter the flame.
The oxyacetylene torch is characterized by two tanks: one with gas and the other with oxygen. This torch is the most expense of the bunch, but it also gets the hottest, so it's one of the preferred choices of professional jewelers. There are three regulators to deal with: one for the torch, one for the gas and one for the oxygen. Once the gas is lit, the oxygen regulator is used to let oxygen into the flame.
- "Basic Jewelry Making Techniques"; Soldering Equipment; Jinks McGrath; 1993
- "The Complete Book of Jewelry Making"; Basic Techniques: Soldering; Carlos Codina; 2006
- Photo Credit Comstock/Comstock/Getty Images
Comparison of Torch Gases: MAPP Vs. Butane Vs. Propane
Three types of liquefied petroleum gas (LPGs) burn in torches for various professional uses, home uses and hobbies. Your choice between MAPP...
How to Solder Using a Small Butane Torch
The torch inspires more fear -- and admiration -- than almost any other tool in the jewelry maker' s arsenal. Learning how...
How to Use a Small Butane Torch
Butane torches can be used in many different ways and for many purposes, but by far the most common of these is...
How to Make a Propane Tiki Torch
Making a propane tiki torch requires some of the same basic know-how as changing out a propane tank on a gas grill....
Pencil Torch Instructions
A pencil torch is a diminutive specialized tool that emits a flame to heat nonflammable items, such as for soldering or for...
What Is the Difference Between a Butane Torch & Propane Torch?
Torches are useful tools for any welding purpose around the house. However, there are several types of torches that utilize different fuel...