Specifications of a Case 680 Construction King Backhoe & Loader

Save

Founded in 1842 by Jerome Increase Case, Case Construction is a manufacturer of excavation and digging vehicles. The Case 680 Construction King is a backhoe and loader designed for excavating and digging. A backhoe consists of a two-part articulated arm with a digging bucket at the end.

Engine Specs

  • The Case 680 Construction King is equipped with a 5.5 liter engine, with a displacement of 336 cubic inches. The engine has four cylinders and is able to generate a net power of 80 horsepower at 2,200 rpm. In addition, it has a net maximum torque of 221 foot-pounds at 1,500 rpm.

Operational Specs

  • The operational weight of this backhoe is 16,960.2 lbs. It has fuel, hydraulic system, oil fluid, cooling system fluid, transmission fluid and rear axle fluid capacities of 30, 13.8, 2.5, 8, 2.9 and 3.4 gallons, respectively. The rear tires size is 16.9 by 24 inches.

Transmission Specs

  • The Case 680 Construction King has a syncromesh transmission type, with four forward and four reverse gears. It is able to achieve maximum forward and reverse speeds of 19.4 and 19.4 mph, respectively.

Dimensions

  • This backhoe loader has a transport length of 22 feet 2 inches, width of 7 feet 5 inches, height of 12 feet 3 inches and wheelbase of 7 feet. It has a ground clearance of 1 foot 1 inch and a height to the top of the cab of 9 feet 1 inch. Its loader has a clearance at maximum dump height of 9 feet 5 inches and a dig depth of 3 feet 7 inches. The Case 680's backhoe possesses a standard load height of 11 feet 4 inches, standard reach from swivel of 19 feet 9 inches, dig depth of 16 feet 8 inches and reach at load height of 8 feet 2 inches.

References

  • Photo Credit Jupiterimages/Photos.com/Getty Images
Promoted By Zergnet

Comments

You May Also Like

  • Cat Backhoe Problems

    Caterpillar Inc. (Cat), a global marketer in earth-moving heavy equipment based in Peoria, Illinois, is widely known as the largest manufacturer of...

  • How to Replace Brakes on a Case 580K Backhoe

    The Case 580 backhoe was in production from the mid-1960s until the late 1970s. The series goes from 580A to 580K. One...

  • How to Troubleshoot the Shuttle Shift on a Case 580 Backhoe

    Problems with the shuttle shift of the Case 580 backhoe can include having no forward or reverse available for moving the machine....

  • How to Change Backhoe Hoses

    Specially designed hoses carry hydraulic fluid in backhoes and most other pieces of machinery. This fluid is used to push and pull...

  • Case 580L Backhoe Specs

    Backhoes make yard and garden development easy, allowing the heavy machinery to do the heavy lifting of large amounts of dirt in...

  • Case Backhoe Specs

    A backhoe is a type of digger, an excavating vehicle. Also known as a rear actor or back actor, a backhoe consists...

  • The Parts of a Backhoe

    A backhoe loader differs from conventional earth moving equipment like bulldozers. While bulldozers lift earth with a forward motion, a backhoe draws...

  • Case 530 Backhoe Loader Specs

    Originally, backhoes and loaders were sold as separate units. The first loader/backhoe combination was the Case 320, which became available in 1957,...

  • Case 580 Loader Backhoe Specifications

    The Case 580 Loader Backhoe is a machine that is used for commercial, agricultural and industrial applications. Case is a North American...

Related Searches

Check It Out

How To Travel For Free With Reward Points

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!