How to Hook Up Batteries in a Series

Batteries can be connected in series to increase their total voltage output.
••• Jupiterimages/Photos.com/Getty Images

In order to extend their capabilities, two or more batteries can be connected together either in parallel, or in series. If the batteries are connected in parallel, the total voltage produced is unchanged, but the capacity of the batteries is increased allowing them to provide more power and last longer. Two batteries connected in series will have the same capacity, but the voltage will be increased to the sum of the voltages provided by each battery. Many commercial batteries which offer higher voltages are made by connecting lower voltage cells in series. For example, a 6 volt battery could be produced by connecting four 1.5 volt cells together in series.

    Cut a piece of copper wire around 6 inches long, and using wire strippers remove 1/2 an inch of insulation from each end.

    Connect one end of the copper wire to the negative terminal of the first battery, and the other end to the positive terminal of the second battery.

    Measure the voltage across the two batteries by connecting the positive lead of the multimeter to the positive terminal on the first battery. Connect the negative lead from the multimeter to the negative terminal on the second battery. The multimeter display will show a total voltage equal to the sum of the voltage of both batteries. If two 1.5 volt batteries were connected together, the multimeter would show 3 volts.

    Repeat the process to add a third battery. Connect a wire from the negative terminal on the second battery to the positive terminal on the third battery. Measure the voltage across the three batteries by connecting the positive lead from the multimeter to the positive terminal on the first battery, and the negative lead to the negative terminal on the third battery. If 1.5 volt batteries are used, the multimeter will show 4.5 volts across the batteries.

    Things You'll Need

    • Copper wire
    • Wire cutters
    • Wire stripper
    • Multimeter

    Tips

    • When connecting batteries in series, all the batteries should ideally be the same type and capacity, so they discharge at the same rate.

    Warnings

    • Never connect like terminals together, only connect together terminals with opposite polarity, i.e. negative to positive.

Related Articles

How to Increase Battery Voltage
DIY Dual Battery Wiring
How to Wire a Battery in Series
Fifth Grade Science Fair Projects on Circuits
How to Charge Multiple 12V Batteries in Line
How to Calculate Load Current
How to Use a Resistor for 12 Volt to 5 Volt
How to Charge Multiple 12-Volt Lead Acid Batteries
The Use of a Series & Parallel Circuit Connection
How to Regulate DC Power With Resistors
How to Turn a 12-volt DC Into a 5- or 6-volt DC
How to Build DC to AC Power Inverters
How to Wire LEDs for 12V
How to Understand Voltage Drops & Resistors
How to Build You Own Battery Pack AA 9 Volt
How to Connect Two DC Power Supplies in Parallel
How to Reduce 12 Volt to 6 Volt
How to Convert 12 Volt to 6 Volt
How to Refresh Nimh Batteries
How to Light an LED With a Lemon

Dont Go!

We Have More Great Sciencing Articles!