Hardwood is the standard for classic wood stairs, because most hardwoods -- all commercial hardwoods -- are durable and can withstand heavy foot traffic. With numerous hardwood species to choose from, and an assortment of wood stain colors, you can achieve a custom look for your stair. An essential part of the stair-finishing process includes sanding the wood to smooth the grain. Since stairs offer limited access to their surfaces, an upright floor sander isn’t feasible.
Hand-held Random Orbital
A "hand-held random orbital" is the best hand-held power sander for hardwood stairs because it minimizes the risk of cross-grain sanding scratches. A flat sanding disk spins rapidly while the entire head of the sander revolves. Hold on tight, when you turn the sander on – you’ll feel the circular revolution motion.
You may use a palm sander on your hardwood stairs. The palm sander's rapid circular vibrations will smooth the wood grain, and all you have to do is guide the sander lightly in a circular pattern. A palm sander is slightly more likely than a orbital sander to leave uneven sanding areas.
Sanding the Details
Manual sponge block sanders work well when you’re trying to get into small corners or around the bases of balusters. These flexible sanding sponges feature an outer coating of sanding grit, and some sponge sanders have angled ends for reaching into tight spots.
You may also use a small contour sander with a triangular sanding pad, although it won’t reach some tight spots as well as a sponge sander will.
The Nitty Gritty
The sander you use on your hardwood stairs is only as good as the sandpaper grit size you select. Sanding disks, pads and sponge sanders all come in various grits, suitable for different sanding stages. For the initial sanding, or to remove old finish if you’re refinishing the stairs, use 80-grit to smooth the hardwood. Switch to 120-grit for the final pre-stain sanding.
After staining, use 120-grit to smooth off the raised grain caused by the staining process. After staining, all sanding is down by hand with a sponge sander.
The final sanding is more like polishing, and it will give the stairs a flawless look. Between coats of wood finish, such as polyurethane or varnish, let the surface dry completely. Then, buff it lightly with a 220-grit sponge sander to remove bits of dust that mar the surface sheen.
- Orbital Sander Reviews: The Different Types of Sanders
- “The Woodworker’s Handbook”; Roger Horwood, 2003
- This Old House: Choosing and Using a Random-Orbit Sander
- Photo Credit Jupiterimages/Photos.com/Getty Images
What Kind of Sander Do You Use for Drywall?
Sanding after installing, taping and mudding drywall is a tedious, dusty job that can be made easier in two ways: First, by...
How to Refinish Hardwood Stairs
Whether you’ve pulled up a worn carpet to reveal hardwood treads or your existing wood steps are showing signs of wear, you...
How to Replace Stair Treads
You may have to replace stair treads because they are damaged, or you may want to replace stair treads because of the...
How to Sand Wood With a Palm Sander
If your wood working project has several large flat areas, you can use a palm sander to make the chore of sanding...
How to Refinish Hardwood Floors With an Orbital Sander
Bringing back the beauty of a hardwood floor adds charm and elegance to any room. Though belt sanders are more aggressive and...
How to Sand Hardwood Stairs
The job of sanding stairs falls between sanding a floor and a cabinet. While the old finish on the stairs and the...
How to Use a Belt Sander on Hardwood Floors
Refinishing wood floors is quite a chore and can take many days. You can save a lot of money doing it yourself...
What Type of Wood Should be Used for Exterior Steps?
The best choice of wood for exterior steps depends on the design of the stairs and their surroundings, the environment in which...