King Cobra S9 Irons Specifications

King Cobra S9 Irons Specifications thumbnail
King Cobra S9 irons are appropriate for a variety of lies.

Cobra Golf was founded in 1973 by Thomas Crow, a former amateur golf champion of Australian descent. Since then, Cobra golf clubs have been adopted by a variety of golf professionals, winning various tournaments using their clubs. The King Cobra S9 set of irons gives golfers the tools to conquer fairways, roughs, sand traps and other challenges.

  1. Three to Five Iron

    • The King Cobra S9 series of irons has a three iron that is 39 inches long with an offset of 0.287 inches, a loft of 20 degrees and a lie of 61 degrees. The four iron is 38.50 inches in length with a loft of 22.5 degrees, a lie of 61.5 degrees and a 0.279-inch offset. The five iron is 38 inches in length with a 0.248-inch offset, a loft of 25.5 degrees and a lie of 62 degrees.

    Six to Nine Iron

    • King Cobra S9 six irons are 37.50 inches long with a loft of 28.5 degrees, a lie of 62.5 degrees and a 0.227-inch offset. The seven iron is 37 inches long with an offset of 0.188 of an inch, a loft of 32.5 degrees and a lie of 63 degrees. Eight irons are 36.50 inches in length with a loft of 36 degrees, a lie of 63.5 degrees and a 0.147-inch offset. The nine iron is 36 inches in length with a 0.122-inch offset, a loft of 40 degrees and a lie of 64 degrees.

    Wedges

    • All King Cobra S9 wedges have a lie angle of 64.5 degrees. The offset for sand, gap and lob wedges is 0.06 of an inch, while the pitching wedge has a 0.08-inch offset. The lob and sand wedge are 35.25 inches long, the pitching wedge is 35.75 inches long and the gap wedge is 35.50 inches long. S9 pitching wedges have a loft of 44 degrees, the sand wedge has a loft of 54 degrees, the gap wedge has a 49-degree loft and lob wedges have a loft of 59 degrees.

    Features

    • King Cobra S9 clubs have shafts made of graphite or steel, and the grip consists of Golf Pride tour velvet 50D. The head is composed of stainless steel with polymer topline, featuring a back cavity plate that dampens vibration and a sole insert made of urethane. This head is a low-profile, wide-sole design that provides golfers with increased launch, shot distance and forgiveness.

Related Searches:

References

  • Photo Credit Jupiterimages/Photos.com/Getty Images

Comments

You May Also Like

  • Cobra SS-I Iron Specifications

    Cobra SS-I Iron Specifications. Cobra Golf was founded by Thomas Crow in 1973. The company developed its first set of forged irons...

  • The Cobra Irons Specifications

    The Cobra Irons Specifications. Cobra has designed its selection of irons to cover the full handicap range with plenty of overlap between...

  • How to Buy Cobra S9 Irons

    The brand and model of golf clubs a player uses can hugely affect how well he plays. Some clubs are simply better...

  • Specifications of a Cobra S2 Fairway

    Golf manufacturer Cobra released the S2 series of clubs in 2010. Among them is the Cobra S2 Fairway, a wood intended for...

  • Cobra FP Iron Specifications

    Cobra FP Iron Specifications. King Cobra manufactures irons, drivers, bags and other golf accessories. In 2006, Cobra released the FP irons along...

  • Cobra 3100 I/H Iron Specifications

    Cobra 3100 I/H Iron Specifications. In 2006, Cobra golf introduced its line of 3100 I/H irons. The design was modeled to mix...

  • King Cobra Driver Specifications

    Cobra Golf is a golf equipment company that started in the 1970s and releases new clubs annually. In 2011, Cobra offers four...

  • Cobra S9-1 Fairway Specs

    Cobra S9-1 Fairway Specs. Fairway woods are clubs with larger heads than irons but weigh much less to increase velocity. Cobra Golf's...

  • Cobra 3400 Specs

    There are 11 different irons in the King Cobra Men's 3400 I/XH set. The set starts out with two-iron with a lie...

  • Cobra Golf Fitting Guide

    Cobra Golf has one of the most comprehensive fitting guides on the market. Cobra has been around since 1973 and is one...

  • Cobra FP Specs

    Cobra FP Specs. Golfers of all abilities can benefit from using the Cobra FP irons according to World Golf. The Cobra FP...

  • OMC King Cobra Tools

    The Outboard Marine Corp., or OMC, was a manufacturer of boat motors such as Evinrude and Johnson and several brands of motorboats...

  • Mustang II Cobra Specs

    Mustang II Cobra Specs. In 1965, the Ford Motor Company revolutionized the automotive industry and created an entirely new car class with...

  • Cobra Carbon CB Specs

    Cobra Carbon CB Specs. Cobra Carbon CB irons are made with a 8620 carbon steel for a soft feel at impact. Similar...

  • Cobra Forged CB Specifications

    Cobra Forged CB Specifications. Cobra began producing golf equipment in Australia in 1973. The first company to offer a utility wood, Cobra...

  • How to Adjust the Tama Iron Cobra

    A snake charmer can work with a cobra in relative safety because he understands how to work with his scaly partner. Like...

  • Cobra LD M Golf Driver Specs

    Cobra LD M Golf Driver Specs. To golfers who enjoy playing the longest courses available, a driver is the most important club...

  • Hybrid Golf Club Distance Comparison to Irons

    There is confusion as to distances for hybrid clubs compared to irons with the same number. Several factors need to be considered...

  • Golf Chipping Downhill: 9 Iron

    In golf, use a nine iron to decrease the loft and gather speed when chipping down hill. Learn more about chipping down...

Related Ads

Featured