The Antec BP350 power supply is designed for use in ATX compliant computer cases. It measures 3.5 inches high by 5.8 inches wide by 5.5 inches deep. The unit's total weight is 2.7 pounds. An 80 millimeter low noise fan keeps the unit cool. It has two +12-volt rails.
Antec BP350 Specifications
The BP350 is a computer power supply developed by Antec. This product is still in production in early 2011 and may be purchased at various retailers. It is a lower-end power supply, without connectors for newer technology such as dedicated video card 6-pin plugs.
-
Physical Dimensions
Features and Compatibility
-
The Antec BP350 is designed for use with either 20 or 24-pin ATX motherboards. The power supply is an ATX12V Version 2.01 compliant device. It is also compatible with Serial ATA devices and may be used with a floppy drive. It features two modes of protection to protect itself and computer components from damage. The first is Short Circuit Protection and the second is Over Current Protection.
-
Output
-
The Antec BP350 has a maximum power output of 350 watts. Users can switch the input voltage depending on their region to either 115 volts and 230 volts. The unit has an input frequency range of 50/60 hertz. Its input current is 8 amps at 115 volts and 4 amps at 230 volts. Its output is +3.3 volts at 20 amps, +5 volts at 20 amps, +12 volts at 10 amps, +12 volts at 13 amps, -12 volts at 0.3 amps, and +5 volts at 2.5 amps.
Connectors
-
The Antec BP350 power supply comes equipped with a total of eight connectors. It has one main power connector with 20+4 pins, one 4-pin ATX 12 volt connector, four peripheral connectors, one Serial ATA connector and one floppy drive connector.
-