Parts of a Bookcase

Save

A bookcase can be made in many different styles and types of wood, but a few essential pieces make up a sturdy, usable bookcase. Bookcases typically have a back, legs, shelves and supports, which hold the heavy weight of your hardback books. Built-in bookcases may use the wall of the house as the backing, but the legs, shelves and supports are still required.

Back

  • The back of a bookcase can be made out of the wood used for the rest of the bookcase, a piece of board or, as with built-in bookcases, can be made with the use of the house wall it rests against. The back of the bookcase is the base to which all other parts must be attached equally to ensure balance. Backs of bookcases are typically long and rectangular and must be cut with even dimensions. Cheaper bookcases may use board to cover the back of a bookcase, but rely on sturdy legs and shelves to hold the bookcase strong.

Legs

  • The legs of a bookcase sit on either side, closing the shelves in. The legs must be as long as the back and often a few inches longer to act as the agents upon which the bookcase stands. The legs must be made out of a sturdy wood such as oak or veneered plywood. Softer woods like pine may work in the short term, but loading a pine bookcase with many heavy books could compromise the strength of your bookcase.

Shelves

  • The shelves, ceiling and floor of your bookcase are all cut to the same length and connect from one leg to the other. Shelves are screwed into the legs and should be made from the same hard wood as the legs are made from. It is important to install shelves with equal strength into both legs to prevent the shelf from titling. The builder should take into consideration the height of the items going on her shelf to make sure she leaves enough space between each shelf to fit the items comfortably.

Supports

  • Shelves require supports to hold the weight of heavy books. Support are L-shaped and are installed underneath the shelf at the back of the bookcase. By using the back of the bookcase for strength, supports act as an arm to hold up the weight of the shelf and the items on top of it. Bookcases with cheaper board backings cannot use supports unless the support is installed against the legs of the bookcase.

Related Searches

References

  • Photo Credit Jupiterimages/Photos.com/Getty Images
Promoted By Zergnet

Comments

You May Also Like

  • How to Wallpaper the Back of a Bookcase

    A colorful or graphic wallpaper applied to the interior back of a bookcase adds an element of design without being heavy-handed in...

  • Shelves Made of Books

    Do you have more books than you'll ever be able to read? If you want to use some of your excess books...

  • Bookcase Earthquake Safety

    When an earthquake strikes, furniture can become dangerous because of the rolling and shaking of seismic waves. Knowing how to secure tall...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!