The priming bulb on your Weed Eater supplies fuel to the carburetor when the engine is cold. It can't perform this function when it collapses; if this happens, you may find your trimmer impossible to start. That's because the collapse, which may be due to the bulb itself, can also signify a blockage in the line leading to the bulb from the fuel tank. The cause is often related to gummy varnishes left by old fuel.
Priming Bulb Operation
The priming bulb on a Weed Eater -- a brand-name string trimmer -- functions in the same way as a priming bulb on any trimmer model. It's located just behind the starting handle on Weed Eaters, and according to the manufacturer, you should press it 10 times when cold-starting the trimmer. Each time you do, it forces gas and air into the carburetor, and each time you release it, it draws more fuel from the gas tank and more air through the air filter. Loosely sprung check valves in the fuel system prevent the backward flow of fuel.
A bulb may collapse simply because it's old and worn out. Bulbs are made from rubber or flexible plastic that can become soft after repeated use, especially if you use fuel with a high ethanol content. If you're in the habit of leaving the tool in storage for extended periods, varnish in the fuel can collect on the sides of the bulb, and this can make the sides stick together when you press the bulb. The solution is to replace the bulb. This is usually a simple procedure, although it involves removing the carburetor.
Faulty Check Valve
When you release the priming bulb, it creates a suction force as it regains its shape, and this force is sufficient to draw fuel through the check valve located in the fuel line that leads from the tank. Another consequence of leaving old fuel in the trimmer for an extended period is that it can gum up this valve and prevent it from opening. If you do manage to start the trimmer, the fuel pump may develop enough suction to open the valve, but it's more likely that the trimmer won't start. You'll probably have to drain the fuel, clean the fuel lines and refill the trimmer with fresh fuel.
Because primer bulbs do wear out, it's a good idea to replace the bulb on your Weed Eater every season if you use the tool frequently. You should also regularly clean or replace the air filter -- a dirty one can contribute to sluggish fuel delivery, and that can lead to poor performance of the priming bulb. If the priming bulb on your trimmer is slow to pop back to its original shape after you press it, try removing the air filter. If the bulb then responds normally, it's time to clean or replace the filter.
- Photo Credit Pavel Semenov/iStock/Getty Images
How to Repair the Carburetor in an Echo Weed Eater
An Echo weed eater operates with a small, internal carburetor that regulates the fuel cycle. Although the carburetor is designed to withstand...
How to Rebuild a Walbro Carburetor
Walbro carburetors are one of the most popular brand of carburetors on the market for small gasoline engines used in weed eaters,...
How to Change the Primer Bulb on a Weed Eater
Before starting your Weed Eaterâ€™s engine, you must first prime the engine by drawing a small of fuel from the fuel tank...
How to Change the Primer Bulb on a Troybilt Weedeater
Troy-Bilt is one of the leading brands of string trimmer, known for professional quality equipment. The primer bulb on a Troy-Bilt string...
How to Troubleshoot a 2-Cycle Homelite String Trimmer
Homelite string trimmers, like all basic two-cycle engines, require only three basic components for operation: gas, spark, and compression. If any of...
How to Troubleshoot an Echo Weedeater
Echo weedeaters allow amateurs and professionals to maintain clean looking, freshly cut lawns. While lawnmowers are best suited to large open areas,...
How to Fix a Stuck Lawn Mower Engine
Pulling the cord on a lawn mower and having it not function can produce frustration, fear and anger. But with a little...
Directions for a Troy-Bilt Weed Eater
Troy-Bilt is an American machine company that produces lawn and garden equipment. Troy-Bilt introduced its first piece of machinery in 1937, which...
The Primer Bulb Will Not Inflate on My Ryobi Trimmer
The primer bulb on your Ryobi trimmer attaches to the return fuel line, which runs from the carburetor back to the fuel...
Why Won't a Troy Built EZ Start Trimmer Prime?
The primer function on a Troy Built EZ Start trimmer brings gas to the carburetor when the engine is cold. This allows...
My Homelite Weed Eater Is Not Holding Fuel in the Primer
The primer bulb acts like a vacuum in place of the crankshaft when it isn’t spinning. It pushes air out of the...