SAE Bolt Specifications

Save

For nearly 100 years, the Society of Automotive Engineering has been instrumental in setting the design and engineering standards for fasteners. J429 is the SAE American standard specification for bolts and other externally threaded fasteners such as studs, screws and sems. The J429 bolt specification identifies bolts by a system of head markings. You can reference the bolt head markings for material, mechanical and strength specifications from charts found online or in SAE and Industrial Fasteners Institute handbooks.

Grade 1 & Grade 2 Hex Bolts

  • SAE J429 Grade 1 and Grade 2 bolt specifications cover 1/4- to 1 1/2-inch body diameter, low to medium carbon steel bolts. Their mechanical and strength properties, measured in pounds per square inch, and are found in the fastener mechanical properties for steel charts which can be viewed online or from the SAE handbook. Grade 1 and Grade 2 bolts have no head marking. They are equivalent in strength and mechanical properties to the American Society of Testing Materials A307 specification for Grades A & B bolts. Grade 1 and 2 bolts have the least strength and heat resistance properties of all the bolts within the SAE J429 specification.

Grade 5 Hex Bolts

  • SAE J429 Grade 5 bolt specifications cover bolts with 1/4- to 1 1/2-inch body diameter and made from medium carbon steel, quenched and tempered. Quenching and tempering are processes related to the heat treating of bolts for specific ductility and hardness values. Grade 5 bolts are stronger and have more heat tolerance than Grade 1 and 2 bolts. Proof load, tensile and yield strength values are found on the fastener mechanical properties for steel charts. Grade 5 bolts are marked by three equidistant lines beginning at the outer rim of the bolt's head to its center. Used for medium to heavy duty fastenings, Grade 5 bolts are equivalent to ASTM A449 bolts up to 1 1/2 inch body diameter.

Grade 5.2 Hex Bolts

  • SAE J429 Grade 5.2 bolts are marked by three equidistant lines beginning on the outer rim of the bolt head and meeting at its halfway point. Body diameter specifications are 1/4 to 1 inch. Grade 5.2 bolts are made from low carbon martensitic steel, quenched and tempered. They are not as durable and heat resistant as Grade 5 bolts because they are made from soft and ductile low carbon martensitic steel. Therefore, do not use Grade 5.2 bolts for an application that requires a Grade 5.

Grade 7 & 8 Hex Bolts

  • SAE J429 Grade 7 and 8 bolts are made from medium carbon high strength alloy steel, quenched and tempered. Used for automotive, structural and high temperature applications; they are the strongest and most heat resistant of all SAE graded bolts. Their mechanical and strength properties are found on the fastener mechanical properties for steel charts on fastener distributor and manufacturer's websites or in the SAE and IFI handbooks. Grade 7 and 8 bolts are marked with five and six equidistant lines, respectively, beginning from the rim of the bolt head to its center. Grade 8 bolts are equivalent to ASTM A354 Grade BD bolts.

Metric, Material, Hardness, Heat Treating

  • Besides US bolt standards, the SAE has standard J1199 for metric externally threaded fasteners. Metric bolt heads are marked with identifying numbers instead of lines. For example, a metric bolt with an 8.8 head marking is equivalent to a Grade 5, and a 10.9 marked metric bolt is equivalent to a Grade 8. Bolt hardness, material and heat treating standards and specifications can be found in the "Related Standards" section in the SAE Fastener Standards Manual.

References

  • Photo Credit bolts image by Petr Gnuskin from Fotolia.com
Promoted By Zergnet

Comments

You May Also Like

  • Threaded Rod Grades & Specifications

    Threaded rod is classified by the American Society for Testing and Materials International by grade, material and strength. The Society of Automotive...

  • Grade 5 Bolt Specifications

    Industry rates bolts in many different ways. The Society of Automotive Engineers (SAE) ratings differ slightly from those of ASTM International (originally...

  • Standard Bolt Torque Specifications

    Bolts are measured using two standards; metric and SAE (Society of Automotive Engineers). SAE bolts are often referred to as standard bolts...

  • ASTM Bolt Specifications

    The American Society for Testing and Materials (ASTM) has helped set standards for many different industries since it was founded in 1898....

  • SAE Thread Specifications

    The Society of Automotive Engineers or SAE has standards for the number of threads per inch that should be on machine screws...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!