6061 Vs. 7005 Aluminum for Bikes


You can't tell the differences between the 6000 series and the 7000 series of aluminum bikes by looking at them. But the compounds and qualities of the aluminum are different. They are different to allow for more affordability, to give the buyer a choice between certain aspects of performance versus cost.


  • When aluminum is cast, it is mixed with other minerals to impart different qualities to the metal. 6061 aluminum is cast with magnesium as its primary additive. 7005 aluminum is cast with zinc as its primary additive. Both formulas have different qualities of lightness, strength and cost. 6061 aluminum is cheaper, thus making a bike built from it more affordable. It's more costly to use zinc as an aluminum additive, making the 7005 series more expensive.


  • While the strength of most bike frames is not much of an issue, when bike frames continue to get thinner and lighter, strength can be a deciding factor. Magnesium frames are not as hard as zinc frames. This makes the 7005 the better choice if your frame is extremely light such as on some elite road bikes. For mountain bikes that have a bigger tube design, 6061 aluminum is strong enough.


  • Due to its inherent hardness, 7005 aluminum bikes feel rougher when you ride them. You might not realize it, but bike frames bend when you ride the bike. They absorb bumps and road vibration. The 6061 alloy is softer, making the bike's ride more comfortable. The stiffness of the 7005 frame make its ride more harsh. For smoother riding bikes, choose 6061 frames.


  • If you care about fashion, keeping up with the latest trends, or want to have the highest priced aluminum bike, you would want to choose the more expensive 7005. 7005 bikes also have more expensive components, and the bike will probably be slightly lighter due to this fact alone. A 6061 bike will cost hundreds of dollars less, though, and will do virtually anything a 7005 bike can do.

Related Searches


  • Photo Credit enduro mtb image by David Bautista from Fotolia.com
Promoted By Zergnet


You May Also Like

  • Aluminum vs. Chromoly BMX Bike Frames

    BMX riders want a light and stiff frame, making flatland and aerial tricks easier to perform. The differences between aluminum and chromoly...

  • How to Bend Aluminum Tubing

    Bending aluminum tubing without crimping the walls is a lot more difficult than you might think. Fortunately there are tricks that you...

  • Polishing Scratched Aluminum

    Polished aluminum has a luster and beauty all its own. Polished aluminum can be so reflective as to be almost mirror-like. Of...

  • How to Polish 6061 Aluminum

    As one of the most commonly used aluminum alloys on the general market, 6061 is found primarily in areas where a light-...

  • Aluminum Hardness Classification

    Pure aluminum is soft and, therefore, may not be ideal for building strong structures. For this application, mineral elements must be added...

  • Difference Between 6061 & 7075 Aluminum

    Determining the difference between aluminum alloys can be important more often than you might think. Whether you need to determine the makeup...

  • The Differences Between Drawn & Extruded Aluminum

    Aluminum is an extremely versatile material used in a wide range of products from hardware to soda cans. There are many different...

Related Searches

Check It Out

10 Delicious Game Day Eats That Rival the Game

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!