Types of Pipe Supports

Save

For pipes to stay where they are installed, they are usually connected to support systems that keep them in place. Pipes can be supported from below using brace supports, from above using pipe hangers and, for pipes running up and down, with clamps that adhere them to the wall. There are many different types of pipe supports in these categories.

Pipe Hangers

  • Because most above-ground pipes in residential and commercial buildings are installed overhead, pipe hangers are the most common form of pipe supports. These come in numerous styles; the most common types are strap-style, hook-style, channel-style and clamp-style. Strap-style pipe hangers are made of a thin, flexible piece of metal or other material that wraps around the pipe and is then attached to the ceiling. Hook-style pipe hangers are made into a J-shape, the longer end of which is attached to the ceiling; the pipe rests on the hook. Channel-style pipe hangers are very wide J-hooks and can help conceal the pipe as it supports it.

Pipe Risers

  • Pipes that rest against the ground typically rest on risers that help keep them secure to the ground. Pipe anchors are rises that rigidly restrict any vertical movement caused by the pipe's internal flow or external forces. Shock-absorbing pipe supports allow some movement by the pipe but swallow any vibrations or excess movement; they are good for pipes that move a great deal as a result of high-feed or inconsistent flow. Insulated pipe supports minimize energy dissipation and reduce the effects of differing temperatures that occur at the support.

Vertical Clamps

  • There are a number of different pipe clamps that can be used to attach vertical pipes to walls. Saddle clamps use top and bottom plates that are secured by bolts and are designed to absorb vibration and heat from high-pressure feed. Gang clamps are made of an angled piece of strong metal, the ends of which are bolted to the wall. They are useful for attaching several pipes within close proximity of each other because of their minimal use of space. Strap-style pipe hangers can also be used to attach vertical pipes to the wall in the same way they can be used in overhead areas.

General Pipe Clamps

  • There are also hundreds of different types of pipe clamps that can be used to adhere pipes to other objects. These pipe clamps typically use some kind of bolt mechanism; they may support the pipe by attaching to themselves or they may be bolted to a wall or elsewhere.

References

  • Photo Credit Pipes and more pipes image by rider from Fotolia.com
Promoted By Zergnet

Comments

You May Also Like

  • How to Install Type B Flue Pipes

    A Type B flue pipe exhausts soot, fumes, gases and toxic odors from B-Vent appliances, which draw air from the interior space...

  • How to Support Copper Tubing Against Wood Joists

    When running hot and cold copper water pipe tubing from the water supply source across the bottom faces of wood joists in...

  • How to Support PVC Pipe

    Easily cut and installed, Polyvinyl Chloride (PVC) pipe is well-suited to most plumbing situations. For PVC pipe to perform properly for many...

  • How to Install a PVC Pipe Water Line

    Polyvinyl chloride (PVC) piping is commonly used when putting in water lines. PVC piping, unlike copper or iron pipes, does not erode...

  • Types of Fittings on Lamps

    The lamps in your home are comprised of a variety of fittings. Some of these components are the same for most lamps....

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!