The Best Caulking Material for Vertical Masonry Expansion Joints


Masonry has been used for thousands of years as a method of construction. This system uses individual pieces bonded together by mortar to form a wall. The individual pieces can be made from a number of materials such as concrete, brick, stone and glass. The strength of the wall is dependent on the type of mortar and the quality of the assembly.

Masonry Wall Expansion

  • Masonry walls expand and contract dependent on the temperature and moisture content. Like almost all elements on the planet, masonry walls will expand as the temperature increases and contract as the temperature drops. Moisture will have the same effect on a masonry wall. The more moisture present, the more it will expand.

Expansion Control Joints

  • To control the expansion and protect the wall structure from cracking under pressure, masons install vertical control joints at specific locations. These joints will absorb the pressure created by the expansion by giving the masonry wall flexible space to expand.

Types of Caulking

  • There are a number of exterior caulking options which will work in masonry. The most important characteristics are an exterior type, adhesive ability and flexible. While almost all exterior caulking will work for this application, polyurethane is the most commonly used because it is superior to latex and silicone caulking in these qualities.


  • Control joints are filled by placing a polyurethane foam rod into the crack to provide support for the caulking. Then apply the necessary amount of caulking on top of the foam rod. It is best to cover the gap is one single application rather than several passes.


  • Photo Credit Brick image by Luke Haverkamp from
Promoted By Zergnet


You May Also Like

  • How to Fill Existing Expansion Joints

    Remove the old caulking from the expansion joint by cutting along the seam between the caulking and the concrete. ... What Causes...

  • Spacing of Control Joints in Brick Masonry

    Masonry Advisory Council: Masonry Expansion and Control Joints; Photo Credit BRICK WALL image by brelsbil from; More Like This. Types of...

  • How to Caulk Against Brick

    Caulking is an important step in any home improvement project and is needed to prevent moisture and air from penetrating the interior...

  • Types of Concrete Block Joints

    Types of Concrete Block Joints. ... How to Repair the Mortar Joint on a Cement Block. Cement block walls are quick and...

  • How to Repair a Concrete Expansion Joint

    Clean out debris and the deteriorated expansion material from the expansion joint using a flat-head screwdriver. ... Concrete caulk all the way...

  • How to Caulk Cement

    A mortar and cement caulk is the best choice for this application, because its design allows it to ... Insert the mortar...

  • How to Caulk Exterior Wood Siding

    Caulk the vertical joints in the siding. Pick a wall, start at the top, and work your way to the bottom as...

Related Searches

Read Article

Make an Ikea Lack Table Look Expensive With This Cheap Hack

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!