Furnaces sometimes engage in short cycling, which is when the furnace cycles on and off for very short periods of time. This leads to major inefficiencies and also indicates that there is something wrong with the furnace. The continual cycling on and off can lead to damage in the starter equipment, which can shorten the lifespan of the furnace, since the cycling puts more strain on the starter components. The problem may be from a restricted air flow, which can come from a clogged furnace air filter.
The furnace owner might need to have the air ducts cleaned also. In some cases, the ducts might even have collapsed, preventing air from effectively flowing through the ducts. These ducts collapse under the weight of the debris.
Dampers and Registers Close
Closed balancing dampers and/or registers can cause the furnace to cycle on and off. The dampers and registers are the devices that regulate the flow of heat and air through the furnace system. When closed, they prevent adequate heat from entering into the spaces that need to be warmed up.
Also, the furnace cycling could be the result of a poorly placed thermostat. To function properly, thermostats should be placed in the most commonly used room in the house. However, thermostats need to be away from drafts, windows and outside walls because these areas can have different temperatures than the rest of the home. The thermostat might also have a loose wire or other mechanical problem.
One of the worst conditions involves the furnace overheating. When the furnace gets too hot, the furnace cycles off to prevent damage. In this circumstance, the owner should definitely call a technician. Sometimes the heat exchanger has a crack that can lead to the furnace overheating. Dirty furnaces are one of the most common causes of overheating.
Igniters with Off Cycles
Some igniters have a lot of off cycles. This can cause property owners to have very high heating bills. Furnace owners should find out how many off cycles the igniter has before purchasing the furnace.
Poorly Sized Furnaces
Furnaces that are too large for the particular building will tend to cycle on and off. Properly sized furnaces should run continuously on cold days instead of cycling on and off. The contractor who installs the furnace should know when the furnace is the right size.
When the furnace cycles on and off, the furnace sometimes has a monitoring system that generates an LED light when there is something wrong with the furnace that indicates what the furnace problem is.
- Photo Credit old smithy image by terex from Fotolia.com
What Are the Parts of a Gas Furnace?
A gas furnace is a type of forced air system to warm your home in the winter. Several parts carry out the...
How to Troubleshoot a Gas Furnace That Stops and Starts
A furnace that often stops and starts is a frequent complaint among furnace owners. Sometimes furnaces have no trouble starting but shut...
How to Troubleshoot a Forced Air Heating System
When your heater doesn't work on those cold winter nights, knowing how to troubleshoot it can help to get it running again....
What Are the Causes of an Overheating Oil Furnace?
Oil furnaces overheat when the furnace doesn’t get enough air flow. This can happen when the air filter becomes dirty, if registers...
Oil Furnace Fires & Shuts Down
Few things can be as aggravating as an oil furnace that shuts down almost immediately after firing, particular right after cold weather...
My Furnace Stops Running
On a cold winter night few things are better than the comfort that comes with a properly functioning furnace. But when the...
What Is a Modulating Furnace?
Furnaces need to cycle on and off depending on the heating needs of the home. This cycling on and off can waste...
Troubleshooting Gas Furnace Burners
Gas furnace burners can malfunction for an unfortunately large variety of different reasons. Troubleshoot your gas furnace burner with help from a...