USB to Ethernet Cable Pinouts

Techwalla may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.
A USB plug has four pins on edge-connectors.
Image Credit: Hemera Technologies/AbleStock.com/Getty Images

An Ethernet port connects a computer to a network and a USB port connects a computer to peripheral equipment such as a mouse or printer. To change a port from one to the other, you need an electronic adapter often called an Ethernet-to-USB cable. You can't splice the connections together using a pinout diagram.

Advertisement

USB-to-Ethernet Adapter

Video of the Day

A Ethernet connection uses an 8-pin RJ45 plug.
Image Credit: Comstock/Comstock/Getty Images

Because USB and Ethernet signals differ, the two cannot be connected together without electronic processing. Many USB-to-Ethernet adapters plug directly into a USB port with a Ethernet connector on the other end, making them susceptible to physical damage. Some manufacturers add a short section of cable to relieve the potential pressure against the USB port on the computer, with the electronic components installed in the part that contains the Ethernet port. The wires do not make direct connections from the USB port to the Ethernet port.

Advertisement

Video of the Day

Adapter Applications

If your computer has a USB port but no Ethernet card installed, use a USB-to-Ethernet adapter instead. A USB cable can only carry a signal for up to 16 feet. If you have a peripheral device such as a printer at a longer distance, use USB adapters at the computer and printer and connect them together with an Ethernet cable up to 300 feet in length. Plug a USB-to-Ethernet adapter into a computer connected to a network to provide an additional Ethernet connection to the network.

Advertisement

USB Pinout

An A type USB connector has four pins arranged inside a small rectangular body. Pin 1 carries +5 volts to power peripheral devices such as USB-to-Ethernet adapters and webcams. Pin 2 carries received data labeled "Data-" and pin 3 carries transmit data called "Data+." Pin 4 carries the ground return for the other three connections. Although most USB connections use the A type, alternate mini A, B and mini B connectors are used on smaller peripheral devices such as digital cameras. The mini versions have five pins but the extra pin makes no connection.

Advertisement

Advertisement

Ethernet Pinout

An Ethernet connection uses an RJ45 plug with eight pins. Pins 1 and 2 carry transmit data and pins 5 and 6 carry receive data in a balanced configuration that isolates the signals from ground. For an Ethernet connection, the other four pins make no connection. An Ethernet port does not provide an external voltage for peripheral equipment. Most Ethernet connections use Category 5, also known as Cat5, cable without a shield, but other variations are available. Cat5 cable can carry all speeds of Ethernet at 10 Mbps, 100 Mbps or 1 Gbps.

Advertisement

Advertisement

references & resources

Report an Issue

screenshot of the current page

Screenshot loading...