Can I Put a Top Coat on Countertop Transformations?

Save

It's easy to see why do-it-yourselfers would want to add a protective top coat after applying Rust-Oleum's Countertop Transformations kit. Kitchen surfaces are vulnerable to water damage, rough utensils and hot pots and pans on a daily basis. Homeowners who want to take extra steps to maintain their kitchen's new look will find some incredibly tough clear coatings that can add years to any countertop's lifetime.

Countertop Transformations

  • Rust-Oleum's Countertop Transformations is an easy to use, all-in-one kit that allows homeowners to apply an attractive new face to their countertops. It is available from home improvement and craft stores. The kit contains a proprietary two-part epoxy topcoat that resists moisture, abrasion and heat of up to 250 degrees Fahrenheit. The finish doesn't measure up to the toughness of stone, but with proper care Countertop Transformations should hold up against typical wear and tear. Rust-Oleum recommends using cutting boards to prevent surface scratches and abrasions, trivets and pot holders to protect against heat damage and mild cleansers for proper maintenance.

Clear Bonding Primers

  • Although many clear finish coats are described as self-priming, Countertop Transformations features a non-stick silicone finish that may require the use of a bonding primer. There are a variety of clear latex and alkyd primers to choose from, but you may want to check out some high-performance clear primers available from industrial coating suppliers. Industrial primer varieties include two-component polyurea primers, two-component epoxy primers and solvent-borne polyurethane primers. An industrial primer gives you less working time to finish the job than a conventional coating, but that should not prove troublesome on a surface area as small as a kitchen countertop.

Polyurethane Finishes

  • You can add further protection to your Countertop Transformations finish by applying two to three coats of a chip-resistant polyurethane. You can choose between coatings designed for furniture or for use as durable floor finishes. There are also industrial urethanes and two-component industrial polyurea coatings designed for greater heat resistance than the Countertop Transformations' epoxy top coat. Apply the polyurethane in a thin layer and allow 24 hours drying time before applying any additional coats.

Epoxy Finishes

  • Some clear epoxy coatings can offer additional durability when compared to the original Countertop Transformations' top coat. There are single-component clear epoxy coatings on the market, but two-component coatings are likely to offer greater protection. Although some epoxies and urethanes promise greater heat resistance, it's important to remember that a new clear coat provides no insulation value to protect the layers beneath. Clear epoxy coatings are available through some hardware stores and home centers, but you'll find a larger assortment at specialty paint retailers.

Related Searches

References

  • Photo Credit Jupiterimages/Photos.com/Getty Images
Promoted By Zergnet

Comments

Resources

You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!