Why Do My LED Spotlights Glow When the Light Is Switched Off?

Save

LED spotlights are designed to provide illumination on a specific area using LEDs and mirrors to focus the light. LED stands for light-emitting diode, a type of illumination created by diodes that feature specific elements that lead to the release of electrical energy as different types of light. LEDs are efficient and long-lasting compared to other lighting options, but they also have problems that can develop through the course of their use.

Symptoms

  • It is common for LEDs to glow after they have been turned off. They might flicker slightly for several minutes, or they may produce a low light, only a fraction of their normal brightness, that does not go away. This may be especially noticeable with a concentrated source of light like a spotlight. If you unplug the LED light entirely, the glow should soon vanish.

Residual Voltage

  • This glow from the LED lights is caused by residual voltage in the electrical line that powers your spotlight. LED bulbs are made out of a collection of diodes. Just one of these diodes is so efficient that the residual current that still travels your power cord is enough to cause it to light up slightly. While this does not indicate a serious problem, it can wear down your LED bulb and might be annoying for your lighting designs. You have a couple of options to rectify the problem.

Diode Blocking

  • If you want to spend a little money to fight diodes with diodes, you can install a zener diode on the same electrical line that the LED light uses. This diode is designed to block residual voltage for delicate electrical components, so it should be able to stop any incoming current from lighting your bulb. Zener diodes come with different values of blocking, so choose a higher value -- enough to block the voltage flowing through your line.

Cluster Bulbs

  • Your LED spotlight is probably already a cluster bulb, made out of several diodes. These bulbs have an advantage because they require a higher initial voltage to start. You might be able to fix the problem by switching to an even larger cluster. This requires buying a new LED spotlight, which can be expensive, but can also solve your problem.

Related Searches

References

Promoted By Zergnet

Comments

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!