Converting a wood fireplace to gas is not a difficult proposition, although most experts suggest having professionals install the necessary components. Available options depend on the type of fireplace. A wood-burning prefabricated fireplace will need a conversion kit, but masonry fireplaces have several options. These include converting the unit to use gas logs, using a gas fireplace insert -- which also makes the fireplace much more efficient -- or converting the fireplace to a vent-free appliance.
Prefabricated Fireplace Conversion
Prefabricated wood-burning fireplaces must have a gas line knockout as part of its structure. This is a circular indentation in the panels lining the inside of the fireplace that will allow for the insertion of a gas line. Because prefabricated fireplaces are usually installed next to combustible framing, ventless gas logs cannot be used as a conversion as National Fire Protection Association (NFPA) standards disallow ventless gas logs in these applications.
Ventless Gas Logs
Although these are touted as one alternative for conversion, many fireplace and hearth companies do not recommend installing these appliances in existing fireplaces. For one, the presence of ventless gas logs may void existing homeowner’s insurance. Secondly, gases from these units escape into the ambient air of the room, which can cause problems for people with respiratory problems. Although they are more efficient than vented models, they can also put excessive moisture into the air.
Vented Gas Logs
Gas logs are ceramic appliances that mimic a real wood fire. They are used primarily to create atmosphere but are not as efficient as gas fireplace inserts. In these conversions, existing dampers in masonry fireplaces are clamped open for safety so that gas fumes are not directed into the homes. For this reason, however, vented gas logs use the most gas of any fireplace conversion as much of the heat produced escapes up the chimney.
Fireplace inserts are combustion appliances designed to fit into existing fireplaces. For inserts to work properly, they must be sized correctly -- proper measurements must be taken when considering a wood to gas conversion. Inserts are sealed combustion units, meaning they draw combustion air from outside. They also directly vent exhaust gases and excess moisture to the exterior. Most insert conversions use existing flues for venting. Gas inserts have fixed gas fronts with a burner and ceramic gas logs inside the unit. Fireplace inserts use gas more efficiently than any other type of conversion. Remote thermostat controls can further increase the efficiency and comfort produced by the fireplace.
- MLive.com: Convert That Wood Burning Fireplace to Gas
- All Around the House: Fireplace Facelift--Convert Your Wood-Burning Fireplace to Natural Gas
- Wood Stoves Direct: Converting Fireplaces from Wood to Gas
- Victorian Fireplace Shop: Converting a Wood Burning Prefab...Gas Logs or Gas Insert?
- Corning Appliance Corp.: Gas Fireplace Inserts
- Clean Sweep Chimney Sweep: Stoves and Inserts
- Fireside Hearth and Home: Frequently Asked Questions
- Photo Credit Thinkstock Images/Comstock/Getty Images
How to Change a Gas Log Fireplace to Wood
Manufacturers make gas logs to look nice with a little flame and almost no heat for the modern homeowner who does not...
How to Convert a Fireplace Back to Wood From Gas
Converting a fireplace from one use to another always requires an inspection of the chimney as well as the actual fireplace. Gas...
How to Convert a Propane Fireplace to Wood Burning
Converting a propane fireplace to a functional, traditional wood-burning fireplace can be done provided key safety requirements are met. The most important...
How to Convert a Fireplace to a Wood Burner
Many people decide to convert their standard fireplace to a wood-burning stove by adding a stove insert. You can install a stove...
How do I Convert a Real Fireplace to Electric?
Wood-burning fireplaces are intended to provide warmth to a home. If the fireplace is in need of repair or does not meet...