Can You Affix a Hanging Basket Bracket to a Concrete Fence Post?
There are several types of fasteners you can use to affix a hanging basket bracket to a concrete fence post. Most of them are easy to install with basic hand tools and a specialty drill. The type of hanger you select depends on the size of the bracket you’re mounting and the load it carries. Does this Spark an idea?
-
Concrete Nails
-
Concrete nails are good for small brackets and light loads. The nails fit through the mounting holes of the bracket and drive directly into the concrete. They rely on friction and small serrations along the shaft of the nail to hold tight to the concrete. Concrete nails are available in a variety of sizes and styles for different applications. Most concrete nails drive into the concrete with a standard hammer, although powder-actuated nails are available. The powder-actuated nails use a special driver that fires the nail into the concrete with a small charge of gunpowder.
Concrete Screws
-
For medium loads, concrete screws are a good option. A hammer drill fitted with a masonry bit is required to drill the mounting holes for the screws. The concrete screws fit through the bracket and screw into the mounting holes, creating a tight mechanical connection with the concrete. Concrete screws typically install with a Phillips screwdriver or nut driver.
-
Concrete Bolts
-
Similar to concrete screws, concrete bolts are larger and can support heavier loads. The concrete bolts screw into mounting holes drilled in the concrete fence post with a hammer drill. The bolts have a larger diameter than concrete screws, providing more friction to affix the hanging basket bracket to the concrete fence post. The larger bolts usually require a socket wrench or impact driver for installation.
Concrete Anchors
-
Concrete anchors can secure the heaviest loads to concrete. Concrete anchors slide or drive into holes drilled in the concrete post. A threaded post extends out of the anchor, providing a mounting surface for the hanging basket bracket. The bracket slides over the threaded posts and nuts tighten onto the posts. Tightening the nuts causes a wedge on the bottom of the threaded post to pull up through the anchor sleeve. The anchor sleeve expands under the pressure and creates a tight mechanical bond with the concrete. Concrete anchors install with a socket wrench or impact driver.
-
