How to Open an Ingersoll Watch
The first Ingersoll pocket watch was manufactured in 1892. The company's long history of creating high-quality timepieces continues today with a range of wristwatches for men. Many of the watches are automatic, which means their functioning is made possible by the movement of the wearer. If your Ingersoll watch is not working, try wearing it for a day. If the watch takes a battery or needs internal repairs, you will have to remove the back. Over the years, Ingersoll has made several different types of case mechanisms, and you will have to inspect you watch to see which method to use to remove the watch back. Does this Spark an idea?
Other People Are Reading
Instructions
-
-
1
Choose a working surface that is well lit. Place a soft cloth on your working surface to ensure that you protect your watch from scuffs. Work only in a clean environment, as dust and lint can cause damage to the watch mechanism.
-
2
Look for a small lip on the edge of the watch back or a slight indentation in the edge. If there is one present, your watch has a snap-off back. Slide the tip of a watch case knife into the indentation or under the lip. Twist the knife to pop off the back of the watch. Take care not to damage the gasket on water-resistant watches.
-
-
3
Inspect the watch back. If there are small screws on the back, use the screwdriver to turn them in a counterclockwise direction and lift the watch back from the watch case.
-
4
Utilize a watch opener tool when there are small notches around the circumference of the watch back. Test the prongs to find which size fits snugly in the notches. Place them in the watch opener. Adjust the wheel on the opener so that the prongs fit into the notches and turn the watch opener in a counterclockwise direction until the back twists free of the watch case.
-
1
References
- Photo Credit Comstock/Comstock/Getty Images
