Calculating Electric Stove Operating Resistance at Temperature

••• electric candle image by Ray Kasprzak from Fotolia.com

Determine the material's power rating. In this example, a nickel-chrome (nichrome) wire in a large coiled electric stove element is rated for 2400 watts at full operating power when glowing cherry red (about 1600°F). The operating voltage of the stove is 230 volts AC (alternating current). With this information, you can calculate the wire's resistance at a particular temperature.


••• hot gun in hand image by Gintautas Velykis from Fotolia.com

The electrical power equation gives us the power produced by an electric current ​I​ passing through a potential difference ​V​

P=VI

We can calculate the steady-state current ​I​ of the stove circuit at full power by dividing power ​P​ by voltage ​V​ to obtain the current.

I=\frac{P}{V}

Since the electrical load is fully resistive and non-reactive (non-magnetic), the power factor is 1-to-1

I=\frac{2400}{230}=10.435\text{ A}

The current through the load is 10.435 A.

Calculate the steady-state resistance of the wire at operating temperature. The applicable formula is

R=\frac{V}{I}

where ​R​ is resistance. Therefore,

R=\frac{230}{10.435}=22.04\Omega

The resistance of the nichrome wire at 1600°F is 22.04 Ω.

Calculating Wire Resistance Change with Temperature Decrease

••• burnt house image by pavel siamionov from Fotolia.com

The same stove element at a lower control setting draws 1200 W of power. At this level, the stove's temperature control reduces the voltage across the element to 130 V. With this information, you can calculate the resistance at this setting, and approximate the lower temperature of the element.

Calculate the electrical current flow in amps by dividing power by the voltage

I=\frac{1200}{130}=9.23\text{ A}

Calculate the element wire resistance by dividing the voltage ​V​ by the current ​I​

R=\frac{V}{I}=\frac{130}{9.23}=14.08\Omega

Calculate the temperature change resulting in the lower resistance of the element. If the initial condition is 1600°F (cherry red) then the temperature can be calculated from the temperature coefficient of the resistance formula

R=R_{ref}(1+\alpha (T-T_{ref}))

where ​R​ is the resistance at temperature, ​T​, ​R​_ref is the resistance at a reference temperature, ​T​_ref , and ​α​ is the temperature coefficient of resistance for the material.

Solving for ​T​, we get

T=T_{ref}+\frac{1}{\alpha}\bigg(\frac{R}{R_{ref}}-1\bigg)

For nichrome wire, ​α​ = 0.00017 Ω/°C. Multiplying this by 1.8 and we get the resistance change per °F. For nichrome wire, this becomes, ​α​ = 0.00094 Ω/°F. This tells us how much the resistance changes per degree rise. Substituting these values, we get

T=1600+\frac{1}{0.00094}\bigg(\frac{14.08}{22.04}-1\bigg)=1215.8^{\text{o}}\text{F}

The reduced power setting results in a lower nichrome wire temperature of 1215.8°F. The stove's coils will appear dull red in normal daylight compared to glowing cherry red at its highest setting. Though hundreds of degrees lower, it is still hot enough to cause severe burns.

Things You'll Need

• Calculator
• Colors of heated metals chart
• Temperature Coefficients of Resistance for different metals chart

Tips

• Always have the correct size pots with plenty of liquid on moderately powered elements to prevent red hot element temperatures.

Warnings

• Never ever lay objects down on top of electric stoves even when cold and turned off.