Instructions for the Goldstar WG10

The Goldstar air conditioner fits inside a standard-sized window.

The Goldstar WG1005R features both an air conditioner and fan. Control the cooling settings by adjusting the dials on the front of the air conditioning unit.

1. Turn the operation dial clockwise to a fan or cool setting: high cool, medium cool, low cool, low fan or medium fan. Both fan modes help circulate air into the room but do not cool the room.

2. Turn the thermostat dial clockwise to cool the room. Turn the dial all the way to the right between 7 and 9 for greater cooling. The higher the number on the thermostat, the greater the cooling.

3. Wait 10 minutes before adjusting the temperature. This gives the air conditioner time to work. Wait at least three minutes before moving the operation dial from cooling to fan to cooling again.

Tip

For maximum cooling, turn the operation switch to high cooling and adjust the thermostat to 9. If the air conditioner is too noisy, rotate the operation dial to a lower cool setting.