How to Change the Keyboard on a Siemens Fujitsu 2030
The Fujitsu Siemens 2030 is a budget PC tablet laptop. That means the standard LCD screen can be converted for touch screen use. Even though the screen is slightly different than on standard laptop computers, the keyboard on the Fujitsu isn't any different. It is one unit that connects to the top of the computer via a ribbon cable. If you have a damaged keyboard on your Fujitsu, you can remove and replace it yourself.
Other People Are Reading
Instructions
-
-
1
Turn off your Fujitsu and unplug the power cable.
-
2
Close the display screen and turn the laptop upside down.
-
-
3
Unplug the battery pack from the bottom of the computer.
-
4
Use your Phillips screwdriver to remove all screws on the bottom of the unit.
-
5
Turn the computer right side up and open the screen.
-
6
Locate the rectangular panel that sits above the keyboard and insert the tip of your screwdriver in the seam where it meets the computer. Pry up to pop it off.
-
7
Lift the keyboard up to expose the thick ribbon cable that runs from the back of the unit to the port at the top of the computer.
-
8
Unplug the ribbon cable from the port and set the old keyboard aside.
-
9
Plug the ribbon cable of a new keyboard into the port and fit the keyboard over the top of the computer.
-
10
Replace the plastic panel that sits above the keyboard and press it down at the sides until it snaps in place.
-
11
Replace the screws on the bottom of the computer.
-
1
