If an interesting window made of recycled materials is what you're after, look no further than your wine cupboard. Windows can be made using a variety of glass bottles and containers and will give your home a unique and funky look.
Things You'll Need
- Variety of glass bottles that are different shapes, sizes and colors
- Hammer or Drill
- Nails or Screws
- Sponge or cloth
Collect a large number of empty glass bottles. Check your local recycling depot for interesting glass bottles
Measure how large you want your window to be. Build a lumber frame that will fit your desired window.
Lay your window frame on the ground and arrange your bottles inside the frame. Get creative. Your bottles don't need to be arranged vertically as if they were sitting on a table. Position them upside down, horizontally and on an angle. Take a picture of your intended design once you have a layout you like so you will remember where you want to put each bottle
Mix your mortar. A good ratio is 3 units of mason sand to every 1 unit of cement mix. Mix only a little bit at a time as making your glass window must be done over the course of a few days.
Lay a base layer of mortar at the base of your window frame. Add in your bottles as you had them arranged, layering the mortar around them. Keep your window frame upright as you do this so the mortar doesn't accidentally bind to anything else as it dries. Add the layers slowly, allowing them to fully dry in the sun. Wipe any unwanted mortar that gets on the glass off with a wet sponge of cloth. Allow your window to dry fully before installing it into your home.
Tips & Warnings
- Go slowly so the mortar sets properly. Follow manufacturer's instructions regarding drying time and conditions.
- These windows can be very heavy when finished. Make sure the wall you are installing your glass bottle window into can withstand its weight.
- Photo Credit Jupiterimages/Creatas/Getty Images