Icom 2200H Clipping Instructions

The Icom 2200H is an FM transceiver with a hand held microphone capable of fitting into a belt clip. Belt clips for the Icom 2200H are similar to belt clips for cell phones, only the Icom 2200H hand microphone needs to be secured with a screw. Use a belt clip compatible with the shape and size of the Icom 2200H. Not all belt clips are compatible.

Things You'll Need

• Screwdriver
• Belt clip that fits the Icom 2200H

Instructions

1. Remove the mounting screw from the back of the Icom 2200H hand microphone using a screwdriver.

2. Insert the hand microphone into the belt clip so the side of the microphone with the buttons faces forward.

3. Align the mounting screw hole on the hand microphone with the hole in the belt clip.

4. Insert the screw through the aligned holes and tighten it with a screwdriver to secure the microphone to the belt clip. To remove the hand microphone, remove the screw and slide the hand microphone out of the belt clip.

5. Squeeze the clip to open.

6. Position the belt so it sots between the open clips.

7. Release the clip to secure it to the belt.

References

• Icom America: IC-2200H Downloads
• Sportys: Swivel Belt Clip (for Icom Transceivers)