How to Remove an Iron-on Hem

Iron-on hems give you a sharp, precise hem.

An iron-on hem may also be called hem tape, and it involves ironing a thin strip of tape into the crease of a hem and then ironing it shut. The iron heats the glue and melts the fabric together. However, if you find that you need to adjust the hem or if you realize you've made a mistake, you need to remove the iron-on hem tape and start over. Removing an iron-on hem takes time and patience.

Things You'll Need

• Iron
• Cotton ball
• Nail polish remover

Instructions

1. Turn your iron on to the same heat that was used to seal the tape in the first place. Look for this temperature on the label.

2. Flatten a segment of the hem on an ironing board and run the iron over the hem several times.

3. Pull the hem open gently and remove the tape.

4. Dampen a cotton ball with nail polish remover.

5. Dab the glue left on the fabric with the damp cotton ball until the glue is gone.

6. Repeat Steps 2 through 5 until the iron-on hem is gone.

References

• Wrights: FAQ