How to Program a DSC Power 832 Security System

Save

The DSC Power 832 security system is available for both home and business use. Programming your security code into your new DSC Power 832 security system only takes a few minutes and enables you to erase the default master code. If you would like to program additional access codes for your alarm system, you may create up to 36 additional codes.

Master Code

  • Press the "*" button followed by "5" on your DSC Power 832's keypad.

  • Enter your current alarm code. If you do not have a current alarm code, enter the DSC Power 832's default master code, "1234."

  • Press "40" and wait for the screen to indicate it is ready to accept a new code.

  • Enter a four-digit code into the DSC Power 832's keypad to create your security code. The security code may contain any four numbers between "0" and "9."

  • Press the "#" button to save the new security code.

Additional Codes

  • Press the "*" button followed by "5" on your DSC Power 832's keypad.

  • Enter your alarm security code. Your alarm security code is four-digits.

  • Enter a two-digit code number. The code number may be a number ranging from "01" to "32."

  • Enter a four-digit access code. The access code may contain any four numbers between "0" and "9."

  • Press the "#" button to save the new additional access code.

References

Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!