How to Properly Size a Roof Vent Turbine

Save

A roof vent turbine is a ventilation device installed on top of the roof. It helps vent air in the attic and is powered by the forces of Mother Nature. Roof turbine vents pull air from the attic space when the slightest breeze blows. This helps keep the attic cooler in the summer and warmer in the winter. These vents come in various sizes to fit the dimensions of your home. They are not too difficult to install and even easier to use.

Things You'll Need

  • Ladder
  • Position a ladder on the ground at the location of the turbine roof vent. Climb up to the roof and inspect the turbine vent. Verify it has been properly installed and the base of the vent is covered with shingles so it is secure to the roof.

  • Wait for a slight breeze and verify the vent is spinning even with the slightest wind. If the vent is not spinning it will need to be replaced with a fully functioning vent.

  • Position the ladder underneath the soffit. Soffit is located under the eave of the house where the roof overhangs. Inspect the soffit and verify there are vents installed. These vents allow for air to circulate in and out of the attic and meet ventilation requirements for the turbine to work properly.

  • Measure the square footage of your house and calculate the number of vents necessary for them to work properly. Refer to the chart in the references section for further details. For example, a house that is 1,300 square feet requires two 12-inch wind turbines.

References

Promoted By Zergnet

Comments

You May Also Like

  • Ridge Vents Vs. Turbines

    Roof vents are designed to control the air temperature in attics. Since hot air rises, attics can hold an enormous amount of...

  • How Effective Are Roof Turbines?

    Roof turbines refer to vents composed of metal that extend from the roof line of a residence or commercial building for the...

  • How to Lubricate a Roof Vent Turbine

    The modern home uses the principals of a ventilated attic space to remove moisture and to balance the temperatures with the outdoors....

  • How to Install a Wind Turbine for Attic Ventilation

    Wind turbines pull hot air from your attic every time the wind blows, resulting in a cooler attic. In winter, turbine vents...

  • How to Size Your Attic Vents

    Proper attic ventilation is an important aspect of a roofing system. A constant flow of air underneath a roof eliminates moisture buildup,...

  • How To Size a Wind Turbine

    To calculate what size wind turbine you will need, determine how much energy you need and how much wind energy you can...

  • How to Install a Roof Turbine Vent

    Sun-generated heat can reach surprisingly high temperatures within a confined space such as the attic. During the summer, heat build-up in sealed...

  • How to Calculate Soffit Vent Size

    Soffit vents contribute to the overall ventilation of an attic. Coupled with ridge vents, they allow for a continuous flow of air...

  • My Attic Turbines Are Not Turning

    Attic turbines are an important component of attic ventilation. Improperly ventilated attics can have issues with mold and mildew as well as...

  • Roof Turbine Vents Are Leaking

    When the wind blows, roof turbine vents are among the most efficient exhaust vents for removing hot, humid air from attic spaces....

  • The Best Turbine Vents

    Designed to enhance roof ventilation, turbine vents alleviate hot air from attics, relying on wind blowing across roofs to remove the air...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!