How to Remove a Drum Trap Cover

Save

A drum trap is a drum-shaped piece of plumbing usually found under the bathtub that keeps sewer gases from coming out of the plumbing and up through the tub drain. As sediment settles at the bottom of the trap over time, it can become clogged. To clear these clogs you need to gain access to the drum trap and remove its cover. Since drum traps only exist in older homes, however, the cover may be stuck on tightly.

Things You'll Need

  • Lubricating oil
  • Old rag
  • Wrench
  • Access your drum trap. This component is usually found under the floor directly underneath the tub. Depending on your home, you may have to remove part of the flooring to get to the trap. You may also gain access from underneath by cutting a hole in the ceiling of the room underneath the tub. If you are unsure of how to access the trap in your home, consult a contractor or plumber.

  • Pour or spray lubricating oil onto the sides of the drum trap cover once you've gained access. Since the cover is screwed on, focus on getting the oil onto its threads. Let the oil sit for 15 minutes.

  • Place an old rag over the cover. Tighten a wrench around the cover and turn the wrench to the left until the cover begins to turn. Apply as much force as is necessary to move the cover.

  • Remove the wrench and the old rag. Unscrew the cover the rest of the way with your hand.

References

Promoted By Zergnet

Comments

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!