How to Troubleshoot an Oscillating Sprinkler


An oscillating sprinkler connected to an outdoor water line sprays a fine stream of water back and forth over your yard or garden. A gear system activated by water pressure causes the oscillating movement. A screw on the side of the water arm lets you adjust the arc of the water spray. If your sprinkler stops working or does not spray in the desired manner, simple troubleshooting steps can help you restore the lawn tool to normal operation.

Things You'll Need

  • Screwdriver
  • Spray lubricant
  • Unscrew the faucet knob for the line or garden hose connected to the sprinkler. Verify the water is reaching the sprinkler and there are no kinks or bends in the line.

  • Shut off the water at the faucet and disconnect the line from the sprinkler to bleed any air trapped in the hose. This could cause the sprinkler to sputter and operate eratically.

  • Twist the screw in the oscillating sprinkler arm clockwise with a screwdriver to lower the arc of water spraying on a sprinkler. To cover a larger area, turn the screw counterclockwise.

  • Apply a short burst of spray lubricant to each end of the sprinkler arm if the unit does not oscillate. Wipe down the sprinkler with a rag. Corrosion, rust and grime may interfere with the sprinkler's normal operation. Lubricant loosens the parts so the sprinkler will oscillate.

Related Searches


  • Photo Credit Jack Hollingsworth/Photodisc/Getty Images
Promoted By Zergnet


Related Searches

Check It Out

How to Make a Vertical Clay Pot Garden

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!