How to Make the Sides of a Guitar Case Thicker

The padding in guitar cases wears out over time

Moving your guitar from place to place puts the instrument at risk. A good case protects a guitar from scratches and other damage. Wooden cases lined with foam offer the best protection. A wooden case prevents the guitar from breakage, and foam inside the case protects the guitar from banging around. Over time, the foam loses thickness and holds the guitar less securely. An inexpensive repair to the case saves expensive repairs to your instrument.

Things You'll Need

• Ruler
• Foam
• Scissors or razor knife
• Spray adhesive

Instructions

1. Place the guitar in the center of the case so that the gap between the guitar and case is equal on all sides.

2. Measure the gap with a ruler.

3. Purchase foam mats and spray adhesive at a craft store. Buy foam as close to the same thickness as the gap between the guitar and case.

4. Lay the guitar case on a flat working surface and measure the depth of the inner sides.

5. Measure and cut lengths of foam into strips matching the depth measurement in step 4. Scissors and razor knifes work well cutting foam.

6. Spray adhesive to one side of the foam strips and press them to the inner sides of the guitar case. Allow the case to dry overnight.

Tips & Warnings

• Place clean rags or and soft material between the case and the guitar to keep the guitar from shifting before repairing the case. Cover the foam with a soft lining material before gluing it to the case for a more finished look.

• Keep the guitar away from the case until the repair is complete to avoid getting glue on the instrument.

References

• StewMac.com; Easy, Affordable Way to Make Your Own Custom-fit Guitar Case; Todd Sams; 2009