How to Test a Blower Resistor

Test a resistor on a lawn blower using a digital multimeter.
••• multimeter image by dinostock from Fotolia.com

All electrical devices contain circuits that channel current to perform various tasks. To limit the amount of electrical current flowing through a part of a circuit, engineers use resistors. The effectiveness of a given resistor is measured in ohms. The more ohms of resistance a resistor has, the less current is allowed to flow in the circuit. This is referred to as Ohm's Law. A resistor typically has its resistance as well as a tolerance written on it. Tolerance is the amount above or below the labeled number of ohms the resistance may actually be.

    Turn on the digital multimeter.

    Rotate the reading dial to the resistance setting. This is designated by the capital Greek letter "omega," which stands for ohms.

    Touch the black multimeter probe to the wire coming out of the left side of the resistor.

    Connect the red multimeter probe to the wire coming out of the right side of the resistor. Note the reading on the screen. If the reading lies within the given tolerance range of the resistor, it is functioning properly. For example, a 200 ohm resistor with a tolerance of 5 ohm should have a multimeter reading between 195 and 205 ohms if it is working correctly.

Related Articles

What Happens When a Resistor Burns Up?
How to Regulate DC Power With Resistors
What Is Ohm's Law & What Does It Tell Us?
Test Your Knowledge on Middle School Science
How to Calculate Millivolts to Amps
How to Convert 12 Volt to 6 Volt
What Is Tolerance in Resistors?
How to Test Electrical Conductivity
How to Reduce 12 Volt to 6 Volt
Characteristics of Aquatic Plants
How to Lower Amperage
How to Make a Simple Circuit
How to Calculate Voltage Across a Resistor
How to Convert a 9V Battery to 3.3V DC
Difference Between 316 & 308 Stainless Steel
What Happens When a Resistor Burns Up?
How to Calculate Battery Voltage
How to Check a Zener Diode
How to Calculate Ohms to Microfarads
How to Diagnose Amperage Draw With a Multimeter

Dont Go!

We Have More Great Sciencing Articles!