How to Install D-Link Router Rangebooster G Without CD

D-Link RangeBooster series routers are designed to connect to a high-speed Internet connection, such as cable or DSL, for the purpose of sharing the connection among multiple different computers and devices, both wired and wireless. The RangeBooster series of wireless routers provide a stronger signal than D-Link's other wireless routers when using the same underlying 802.11g wireless technology. You can install a D-Link RangeBooster G router without a CD by using the integrated Web-based configuration interface.

Things You'll Need

• Ethernet cable

Instructions

1. Connect one end of an Ethernet cable to the Ethernet port on the Internet connection device, such as a cable or DSL modem.

2. Power on the Internet connection device and wait two minutes for the signal to synchronize.

3. Connect to other end of the Ethernet cable to the "Internet" port of the D-Link RangeBooster.

4. Power on the D-Link router and wait 30 seconds for it to initialize.

5. Connect an Ethernet cable from a computer to one of the "LAN" ports on the D-Link router.

6. Open a Web browser, and then type "192.168.1.1" without quotes into the address bar. Press "Enter."

7. Type "admin" for both the user name and password, and then press "Enter."

8. Click "Wireless settings."

9. Enter the applicable wireless network options, such as the network name or SSID, the encryption type and the password. Click "Save Settings" to apply the changes.

10. Remove the Ethernet cable from the computer, if the computer will connect wirelessly.