How to Replace the Agitator Shaft on a GE Hydrowave Washing Machine

Save

General Electric Hydrowave washing machines were introduced in 2006. The Hydrowave technology changes the way that the washer's agitator rotates, relying on a shaft and tube instead of a traditional transmission. Like older models, Hydrowave washing machines still rely on an agitator that is located in the center of the wash tub. The agitator rotates, which moves the water, soap and garments located inside of the washing machine around. If the agitator breaks or cracks, the contents of the wash tub may not be adequately moved, resulting in an inferior wash. To restore your washing machine to normal working order, replace the agitator.

  • Unplug the washer from the wall outlet prior to disassembling the washer.

  • Open the lid of the washer. Remove the dispenser cup at the top of the agitator. To remove, lift the lock ring at the bottom of the dispenser cup, then remove.

  • Remove the agitator cap by prying it off using a flat-head screwdriver.

  • Remove the agitator bolt, securing the agitator to the bottom of the washer, from the center of the agitator.

  • Lift the agitator out of the washer and place it on the ground.

  • Place both feet on the agitator to support it. Pull the shaft off of the agitator.

  • Tip the shaft of the agitator upside down and remove the cam.

  • Insert the cam into the new agitator shaft. Align the slots in the top of the agitator with the tabs in the base and snap the new shaft onto the agitator.

  • Insert the agitator into the washer and secure using the agitator bolt.

  • Replace the agitator cap and dispenser cup.

  • Plug the washer back into the wall outlet.

Related Searches

References

Promoted By Zergnet

Comments

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!