How to Tie a Rope to Pull a Tree

Save

Cutting down a tree can be a dangerous affair if not done properly. Trees are best cut down using the natural lean of the tree. But cutting down a tree with the lean is not always possible, especially if expensive property is in the way. A rope is often useful when cutting down a tree to pull it in the right direction when it falls. Using the right knot, in this case the clove hitch, prevents the rope from coming loose under the weight.

Things You'll Need

  • Rope
  • Measure a length of rope long enough to wrap around the tree a few times and, when pulled taut, allows you to stand clear from the tree.

  • Make a mark on the tree for the first cut location.

  • Wrap the rope around the tree one time. Bring the lose end of the rope under the wrapped portion of rope to create an "X."

  • Wrap the rope around the tree again, pulling the free end of the rope up and over the first pass of rope.

  • Bring the free end of rope through the eye of the second turn to tie off the knot. It should be a fat "X" shape.

Related Searches

References

  • Photo Credit Jupiterimages/BananaStock/Getty Images
Promoted By Zergnet

Comments

Related Searches

Check It Out

How to Make a Vertical Clay Pot Garden

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!