How to Install a Billboard
They are pretty much everywhere we go, but many do not know that they profit owners between $1500-4000 per month. I am talking about billboards. These high-rising structures net their owners huge profits as they advertise to consumers passing by. Putting them up usually takes around 5 hours, but the process is not as difficult as it may seem.
Other People Are Reading
Instructions
-
-
1
Remove the four 5/16 hex billboard installation bolts. These bolts are at the top of both the left- and right-side cabinets, meaning there are 8 in all. You must also remove the four 5/16 hex billboard installation bolts from the back edge of the billboard.
-
2
Lift the billboard to the top of the cabinets carefully. Now remove the three access screws from the front edge of the billboard between the billboard and the race leader marquee.
-
-
3
Open the billboard's top section and attach the billboard to the top of the game cabinet. You must use the four 5/16 hex bolts installed inside the front edge of the billboard, but remember to not tighten the bolts just yet.
-
4
Attach the billboard to the top of the game cabinet. You must use four 5/16 hex bolts installed through the L-bracket along the outside back edge of the billboard, but remember to not tighten the bolts just yet.
-
5
Align your billboard and tighten all the bolts. Now go inside the billboard and connect the three- and four-pin Molex connectors. This will provide power to the lamps that illuminate your billboard at night. Finally, reinstall the three access screws along the front edge of the billboard to close the billboard case.
-
1
References
Resources
- Photo Credit Thinkstock/Comstock/Getty Images
