How to Load Paper Into a Hypercom T7PT77
The T7 Plus terminal is a credit card and debit machine designed for use in compact counter space. The machine provides the same debit and credit card service as a fully loaded Point of Sale (POS) system, which is the computer and software used in checking out customers and taking their payments. It provides instant approval of transactions and is available in 19 or 35 keypad configurations. Replacing the thermal paper roll in the T7 Plus takes only a few moments.
Other People Are Reading
Instructions
-
-
1
Place thumb and index finger on the plastic paper cover tabs at the bottom front of the paper roll cover. These are also positioned at the top edge of the T7 Plus terminal.
-
2
Squeeze the tabs inwards and lift the cover up to remove.
-
-
3
Pull out the used-up roll from within the plastic cover.
-
4
Slide in the new roll with the free edge of the paper feeding the printer from underneath the roll. The free edge is also positioned toward the top edge of the T7 Plus terminal.
-
5
Pull out a length of the free edge of the paper roll.
-
6
Close the plastic paper roll cover with this free edge sticking out from the bottom side of the cover. The cover will click when closed.
-
7
Tear off excess paper from the free edge, which is sticking out. Continue using your T7 Plus as you normally would.
-
1
References
Resources
- Photo Credit Stockbyte/Stockbyte/Getty Images
