How to Line a Drawer With Tarnish Resistant Cloth

Preserve silverware with tarnish resistant cloth.

Tarnish resistant cloths are cloths that protect your fine silverware from getting tarnished over time. Some people choose to make silverware carriers with tarnish resistant cloth while others line drawers to protect the silverware. Lining a drawer with the cloth will not only prevent the silverware from getting tarnished but it will pad the drawer so the silverware doesn't get bumped and scratched.

Things You'll Need

• Ruler
• Ironing board
• Iron
• Cotton cloth
• Glue

Instructions

1. Remove the drawer.

2. Measure the dimensions of the inside of the drawer. Measure the bottom of the drawer as well as the sides to line the entire drawer.

3. Add the dimensions of the sides of the drawer to the dimensions on the bottom. This will enable you to cut three pieces of cloth rather than five. One large piece will cover the bottom and the left and right sides while the other two will cover the front and back sides.

4. Smooth the tarnish resistant cloth on an ironing board. Place a cotton cloth over the tarnish resistant cloth and iron it on medium heat to remove all of the wrinkles without damaging the cloth.

5. Cut the cloth to the proper dimensions with the sharp scissors. Sharp scissors will help you make a smooth cut.

6. Spread glue over the bottom and side surfaces of the wood. Use a slow drying glue that will attach fabric to wood such as fabric glue or super glue. Spread a thin layer of glue.

7. Immediately press the fabric over the glued area. Smooth out any air bubbles with your hand and position the fabric until it is in the right position on the inside of the drawer.

8. Repeat the process with the front and back sides of the drawer. Let the drawer dry completely before putting it back.

References

• Spazztic Crafts: The Crafter's Glue Guide
• Lowes Creative Ideas: Attaching Fabric to Wood
• Sterling Buffet: Tarnish Resistant Cloth