How to Make a Steel Can Crusher

Save

A steel can crusher is perfect for anyone wanting to compact recyclable cans for a bag or bin. Wall-mounted crushers come in handy and provide more leverage so you can easily compact the cans at a faster pace compared to smashing cans with a hammer. Wall-mounted units can also be erected right above the recycling bin so crushed cans fall into place, making cleanup a breeze. Only a few materials are needed to begin crushing cans at your home.

Things You'll Need

  • 32-inch long, 2-inch by 4-inch board
  • Handsaw
  • Tape measure
  • Door hinge
  • Drill
  • Drill bit
  • 2 jar lids
  • Screwdriver
  • 1-inch wood screws
  • 3-inch wood screws
  • Door handle
  • Stud finder
  • Cut the 32-inch, 2-inch by 4-inch board in half using a handsaw. Measure the length of the board to ensure the cut is exactly half. You will need two pieces of wood 16 inches in length.

  • Lay the two boards on a table so they are vertical to one another. Place the door hinge to the end of the boards. One end of the hinge will attach to the end of the bottom board while the other on the end of the top board. The two boards are now attached together.

  • Take the jar lids and place them on the table. Make sure the lids are in good condition and have no signs of rust. With a drill, make two holes in each jar lid. Place one lid on the inside of top board and one on the inside of the bottom board. Secure the lids using 1-inch wood screws through the drilled holes.

  • Fold the boards down so the lids rest inside the two pieces of wood. Place the screen door handle to the top board. Use a screwdriver to screw the handle in with the provided screws. If no screws are provided, use 1-inch wood screws. The handle allows for an easier grip on the crusher.

  • Use a stud finder to find a stud where the can crusher will rest. Hold the bottom board against the wall on the stud and use two 3-inch wood screws and a drill to secure the board. One screw should be planted near the top of the board and one toward the bottom for extra support.

  • Allow the top board (with the handle) to hang freely. Open the crusher and place cans inside between the jar lids. Grip the handle and push down to crush the can. Watch the bottom board over time, since crushing may cause screws to retract from the wall.

Tips & Warnings

  • Be careful to keep fingers away from the crusher when installing cans.

Related Searches

References

  • Photo Credit PhotoObjects.net/PhotoObjects.net/Getty Images
Promoted By Zergnet

Comments

Resources

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!