How to Glue Limestone

Save

Limestone is a soft, porous rock that has similar properties to marble and other light-colored stones. The porous nature of limestone makes it an ideal material for gluing. Glue designed for use with limestone or similar stones creates an incredibly hard bond that is difficult to break, so you can glue even very large pieces together.

Things You'll Need

  • Grease-fighting cleaner
  • Soft cloths
  • Acetone
  • Acrylic adhesive designed for use with limestone
  • Glue hardener
  • Popsicle sticks
  • Large clamps
  • Sandpaper
  • Clean the limestone with a grease-fighting cleaner and soft cloths, then rinse. Wash the surface of the stone with acetone and a soft cloth. Allow the stone to dry overnight to ensure all water particles have evaporated from the surface.

  • Mix 98 percent glue with 2 percent hardener. Blend the two materials together with a popsicle stick.

  • Apply a thin, even layer of glue to both stone pieces using the popsicle stick. Remove any glue that has spilled over the sides.

  • Clamp the two stone pieces together with large clamps. Wipe away any excess glue from around the edges. Allow the glue to dry overnight.

  • Sand away any excess glue with sandpaper after the glue hardens.

Related Searches

References

  • Photo Credit Photos.com/Photos.com/Getty Images
Promoted By Zergnet

Comments

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!