Over time, your old Weber BBQ may lose its shine or perhaps show signs of rust. Maybe you just bought a new grill, but wonder if there might be some life left in that Weber kettle grill. Weber charcoal barbecue grills are famous for their distinctive globe shape, which you can adapt into a fire pit with a few household tools. Use the lower half for an in-ground fire pit, where friends and family can gather to relax, roast marshmallows or grill hot dogs on a stick. Only Weber charcoal grills are suitable for this project.
Step 1
Take off and set aside the dome, cooking grate and charcoal grate for your Weber grill.
Video of the Day
Step 2
Remove the bolt that secures each of the three legs to the underside of the Weber grill, using a screwdriver. Pull each leg out of the tube welded to the bottom of the grill.
Step 3
Remove the two screws holding the handle to the side of the grill.
Step 4
Measure the diameter and depth of the grill without the dome lid.
Step 5
Dig a hole on level ground an inch wider in diameter and an inch deeper than your grill, using the shovel. For example, a Weber grill 25 inches in diameter and 18 inches deep, without the dome lid, would require a hole 26 inches in diameter and 19 inches deep.
Step 6
Close the vents on the side of the Weber grill and lower it into the hole. Push inside the grill firmly to seat the Weber into the ground.
Step 7
Pour gravel or ornamental rock around the outside perimeter of the Weber grill to fill in the gap between the grip and surrounding dirt. Spread a circle of gravel or ornamental rock around the edge of the grill, on the ground, as wide as desired, for a decorative touch.
Step 8
Lower the charcoal grate into the Weber as a support for split logs when building a fire in your new fire pit. Cover the fire pit with the Weber dome when not in use to prevent an accident.
Video of the Day